incinerator Providers.7) Burn Cost: 15 – – 20 Kg/h
Mmedical waste burner capable of disposing as much as 0.25 cubic meter of transmittable or pathological waste.
signal flame, reload sign, temperature controller gadget, shedding capacity of 250kg/ 10 hrs in two phases
Total / Paint:-.
Waste Management Tools must have;.
Burner to possess dual burning chamber and also control amount of dioxin as well as other gasses released without being hazardous.
Estimated dimensions, to manufacturers typical, but to be compact as possible. Capability: roughly 60kg daily, voltage: 220V and also gas fired.
CSH Health Center, (Calabar, Nigeria)
Mmedical waste burner capable of getting rid of approximately 0.5 cubic meter of transmittable or pathological waste.
Incinerator to possess dual burning chamber as well as control amount of dioxin and other gasses discharged without being harmful.
Approximated dimensions, to suppliers standard, however to be compact as possible. Ability: approximately 120kg daily, voltage: 220V and diesel fired.INCINERATOR (WASTE INCINERATOR).
Gas:- Gas.
– Approximately 100kgs per hr of waste or red bag waste rated at 2200 BTU’s per kg.
Long Shoes Pairs: For waste handling– 06 Pairs.
Upkeep control proposition.
Specs with a capability to melt 100kgs/Hr.
Best quality air-cooled stainless steel. The chimney/stack must have a.
▪ Connect heaters to fuel supply.
To bum medical waste in a clean in addition to environmentally effective
cargo”.
accreditation.
The total construction and constructing period. The delivery.
5 Ability to support tools.
the specialist.
2.11 Afterburner.
6 Appointing as well as Training.
Paperwork in order to help with the lawful needs for the
▪ Customer support: The Bidder is called for to guarantee that a.
To make it possible for free-flow of diesel from the storage tank to the incinerator.
Medical centre and also the Getting Authority. The therapy plant must.
Waste Tracking Guideline 2006, lawful notice No. 121 of
▪ The maintenance agreement price includes work, transportation and also.
A cover;
The plant transferred by sea shall not be delivered as “deck.
Republic of Kenya. The Bidder will supply a time .
iii.
Make accessible all needed technological advice, drawing, etc to.
iv.
Calcium silicate insulation and also a hot face mixture of very.
▪ The incinerator shall be operated on a three-phase power supply
Supply an one-year substitute solution components (e.g. oil filters, air.
importation. The Prospective buyer shall offer each of the essential
Setup works.
I. Waste type medical care waste.
Take place at the last destination.
Procedure manual 2 sets.
Operators after installation & & commissioning of the devices.
▪ The container should be attached to the incinerator at higher level.
Reduced section of chamber walls.
▪ Calcium silicate.
▪ The smokeshaft will be painted with accepted warmth immune.
· Optimum evaluation: a minimum of 450kW/hour.
▪ Thermal conductivity 1.3 W/mk.
▪ Restricting constant solution restriction 1500 ° C. ▪ Thickness 100mm.
Any sort of roof adjacent to the incinerator.
▪ 1 off diesel-fired ignition burner– temperature controlled.
ͦ Verifying this accredited care, service as well as.
Burning chamber for removal of particle pollutants.
▪ 3 stage 415 V a.c., 50/60 Hz.
▪ Provide lifting gears as forklift, gantry, rollers, and lifting.
Additional components and consumables recommended by the Supplier.
The linking pipe has to be a black pipe of accepted estimate.
Subsequent connected specs
For the Supply, installation & & appointing of a Clinical Waste Burner as comprehensive listed below:.
2.10 Ignition Burners.
chamber. Approximate measurements 800 mm diameters x 2100mm.
▪ The primary burning chamber need to guarantee minimum departure.
2.3 Ash.
▪ The Potential buyer is in charge of all authorizations and approvals for
Fulfillment of the need with their offer, prospective buyers need to.
Temperature level isn’t less than 850 ° C
And also setup time have to be agreed between bidders, target.
▪ For the technological examination, not simply the treatment plant
ͦ Supplying the name as well as address of its licensed.
▪ Needs to have particulate cleaner (scrubbers). A mechanical.
fashion. It should use a temperature based reasoning control system
2.14 Electrical Supply.
long.
2.7 Warm face material.
Maximum rating: 450kW/hour.
The Producer, and which has the capacity to rapidly offer genuine.
products.
4 Certification.
▪ Agents of the Getting Authority and also the
Fully packaged oil kind, total with electric ignition and also flame failure controls, wired with constant running fan and also total with all shutoffs, fan and also electric motor.
▪ Refractory lined flanged chimney should be over the height of.
· Maximum use: a minimum of 6 litres/hour.
▪ Give lifting equipment to hoist, erect and place smokeshaft, as well as.
consisting of:
Calcium silicate insulation).
· Regular consumption: at least 3 litres/hour.
Includes all devices.
▪ Prior to the expiry of the service warranty/ signing off, the supplier shall.
Branches to assist in the workout.
Of the manufacturer:.
▪ Temperature level indicator main as well as secondary chambers 0-.
Offer supports slings as necessary. Enable cutting of tree.
29th September 2006 as well as especially third timetable law
Substantial steel help frame. Internally the covering is lined with.
▪ All the burners to be supplied and set up meet the
Additionally necessary additional systems and additional
2.12 Flue gas treatment.
▪ The Prospective buyer must provide a guarantee for one year.
▪ It is anticipated that the Prospective buyer cooperates very closely with the.
Maintenance, service as well as fixing centre, which is accredited by.
Lodging for the attending service technicians.
▪ The representative shall perform a two days functioning & & maintenance
And also final approval. The provisional and final approval shall
vi. Small ability 100Kg/hour put tons.
▪ National Atmosphere Monitoring Authority (NEMA).
▪ The system supplied will be developed to operate usually under
Well as on information displays in addition to on print-outs will stay in
· Heater: scheduled on/off operation.
▪ Density 25mm.
▪ The key combustion chamber is the important structure of the.
refractory lining).
Burner electrically operated
required for the issuance of provisional approval.
Is offered throughout the 1 year service warranty period. In.
▪ Maximum working duration 12 hrs.
Consisting of level indicator.
Recipient, together with the Prospective buyer’s rep, shall
Remember: The secondary burning chamber should be certain the gas temperature as determined versus the within wall surface at the second chamber & & not in the fire area, is less than 1100 ° C. 2.2 Throughput.
Service provider for the brand new waste handling structure/ real estate and also will.
Installment and also putting into use the equipment.
▪ Duration of Execution is 90 days from contract signature for
▪ The Prospective buyer shall supply and install the incinerator with the.
Seconds to make sure the unit’s dependable destruction of the combustion
A wind turbine allowing air.
Optimum use: 9 litres/hour.
2.9 Smokeshaft/ Heap.
2 Tools.
Include a high capacity thermal oxidizing additional chamber.
Execute the controls, screening and first authorization for provisional
ii.
. Training to the Biomedical engineering employees in addition to burner.
Burner: scheduled on/off operation.
Incinerators to be suitable for the expert disposal of scientific & & medical waste/ rubbish with a greater lots capacity in the series of approximately 1000-1500 Kg. The sturdy, self-contained incinerators will supply an efficient and extremely efficient, safe disposal as well as to be made according to relevant global instructions, e.g. CE, EU, etc. Type of Gas: Diesel or Petrol or Natural Gas. Temperature controlled,
effective burner for optimum gas economy. Burner at the best innovation and an approximate capacity of 2000 bunch/ year. Maybe an incineration ability of 200 kg/ human resources in addition to a calorific worth of 7500 kcal/ kg. Industrial and also domestical waste.INCINERATOR For incineration of Lab wastes materials
Functions
i.Smoke and odor free
ii.High Temperature, refractory mobile lining with excellent warmth retention
iii.Quick warm up time
iv.Must have Another room v.Constant run follower
vi.Temperature monitoring vii.Thermostat Control
Technical Specifications
i.Capacity: approx. 0.20 m3
ii.Fuel intake: 5 litres/ hour Diesel Oil
iii.Min Operating Temp: 900 oC
iv.Max Operating Temp: 1350 oC
v.Residence Time: 2 sec
vi.Burning speed: 35kg/hr minimum
Accessories
Typical accessories needed
Consumables and also Spares
Provided with spares as well as consumables to achieve a minimum of 1000 examinations
THROUGHPUT.
Calcium Silicate.
Second Chamber: 2 Secs @ 850degrees C.
The primary combustion chamber must ensure minimal leave temperature amount isn’t less than 850 degrees C.
INSULATION.
Restricting Continual service limitation 1000 degrees C.
Medical waste is posing a growing problem all over the world, jeopardizing the health of staff, patients, disposal workers and anyone else coming into contact with the often hazardous materials discarded by hospitals and other healthcare sites. Hospital waste varies from site to site and the biggest challenge is to dispose of this wide range of waste streams. Incineration is still the preferred way to process medical waste without endangering the heath patients, staff or anyone else coming into contact with them. Clinical waste is costing more and more to dispose of safely. Health Clinics and Health center can now handle their own waste streams using one of our specialist medical incinerators. Destroying hazardous waste at source is by far the most effective and efficient way of handling waste that could potentially spread diseases or viruses.Standard 20% -25% of the whole waste generated by medical care facilities is connected to as poisonous and might create a selection of health as well as environmental dangers if not treated and damaged in an proper way. With years worth of expertise in this sector, our clinical collection of burners are made to provide for the economical needs of tiny facilities to the more demanding and also specialized requirements of big medical facilities in their waste tracking procedures.
HICLOVER is now offering a full range of medical waste incinerators, designed to provide efficient waste destruction, utilizing best available technologies and environmentally friendly process. Due to the secondary chamber with its 2 second retention period, our medical incinerator range is well suited to process medical waste.Our products ensure reliable, tidy as well as simple disposal of medical waste is possible. The incineration of clinical waste such as pathological waste ( red bag waste), Biohazards & & Sharps, General Medical Waste, from Hospitals, Study Center, Drug Companies, Drug Produces, Main Treatment Trusts, Aesthetic Surgical Procedure Centers, Nursing Residences, Care Homes and other Medical Waste.
○ Middle-Small Ability ( TS Model) ※ Key Qualities:— — Dual Burning Chamber— — Dual Italy Heater–– Burning Rate: 10-100kgs a hour–– Burning Chamber: 0.1M3-1.2 M3 ※ Optional Function/Parts/Material/ Burning Cost: — — Stainless Steel Chimney — — Dry Smoke Filter Chamber— — Chimney Elevation Customized Made— — Upgrade/Downgrade Burning Rate
○Large-Middle Capacity(YD Model)
※Main Feature:
–Three Combustion Chambers
— Double Italy Burner
–Burning Rate: 30-600kgs per hour
–Combustion Chamber: 0.36M3-5.5M3
※Optional Function/Parts/Material/Burning Rate:
— Stainless Steel Chimney
— Dry Smoke Filter Chamber
— Chimney Height Custom Made
— Semi-Automatic Waste Feeding
— 3-Section Wet Scrubber System
— Movable Platform Feeding Door
— Additional Burner
— Upgrade/Downgrade Burning Rate● Service before and also after Setup — — Manufacturing facility training for installment, operational and also upkeep with free cost. — — Online solution service for installment, operational as well as maintenance with complimentary price. — — Onsite installation, operational and maintenance training — Onsite solution assistance after installation
● Spare components supportHICLOVER currently uses extra parts such as: — Burners( diesel oil, LPG or gasoline ) — Element for burners — Fire ropes — Burner chamber maintenance substances — Air Fan — Temperature level aspect — Smoke filter block — Control box — Other components
Nanjing Clover Medical Technology Co., Ltd..
Tel: +86 -25 -8461 0201 Fax: +86 -25 -8461 0406
Web site : www.hiclover.com Email— : [email safeguarded] Email: [email protected]
HICLOVER now offer a full range of containerized incineration systems, placing us at the forefront of the latest transportation and industrial trends. Containerization enables immediate waste management as the units are pre-assembled and pre-installed.
Containerization is the most feasible and viable option in contrast to the construction of on-site facilities and housing structures, eliminating the man power and costs involved. The system has the added benefit of total mobility (both local and international), and is ideal for military and civil camps and remote locations where infrastructure is scarce.※ Main Attribute:— — Double Burning Chamber— — Double Italy Burner–– Burning Cost: 10-100kgs per hour–– Burning Chamber: 0.1M3-1.2 M3— — Mobile Incinerator, Standard delivery containers, Easy to move/transport system— — Free Installation, Pre-installed burner, Convenient for decks — — Ultraviolet light sterilization inside
Items/Model TS10(PLC) TS20(PLC) TS30(PLC) TS50(PLC) TS100(PLC) Burn Rate (Average) 10 kg/hour 20 kg/hour 30 kg/hour 50 kg/hour 100 kg/hour Feed Capacity(Average) 20kg 40kg 60kg 100kg 200 kg Control Mode PLC PLC PLC PLC PLC Combustion Chamber 100L 210L 330L 560L 1200L Internal Dimensions 50x50x40cm 65x65x50cm 75x75x60cm 100x80x70cm 120x100x100cm Secondary Chamber 50L 110L 180L 280L 600L Smoke Filter Chamber Yes Yes Yes Yes Yes Feed Mode Manual Manual Manual Manual Manual Voltage 220V 220V 220V 220V 220V Power 0.5Kw 0.5Kw 0.5Kw 0.7Kw 0.7Kw Oil Consumption (kg/hour) 5.4–12.6 7.8–16.3 10.2–20 12.1–24 14–28 Gas Consumption (m3/hour) 6.2–11.4 8–15.7 9.8–20 9.9–26.1 10–32.2 Temperature Monitor Yes Yes Yes Yes Yes Temperature Protection Yes Yes Yes Yes Yes Oil Tank 100L 100L 100L 100L 200L Feed Door 30x30cm 45x40cm 55x50cm 70x55cm 80x60cm Chimney 3Meter 3Meter 5Meter 5Meter 10Meter Chimney Type Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel 1st. Chamber Temperature 800℃–1000℃ 800℃–1000℃ 800℃–1000℃ 800℃–1000℃ 800℃–1000℃ 2nd. Chamber Temperature 1000℃-1200℃ 1000℃-1200℃ 1000℃-1200℃ 1000℃-1200℃ 1000℃-1200℃ Residency Time 2.0 Sec. 2.0 Sec. 2.0 Sec. 2.0 Sec. 2.0 Sec. Gross Weight 1500kg 2200kg 3000kg 4500kg 6000kg External Dimensions 140x90x120cm 160x110x130cm 175x120x140cm 230x130x155cm 260x150x180cm Equipment Double chamber medical infectious waste incinerator Capacity 10-30 kg per hour Characteristics of waste
Mainly syringes and needles from immunization routine and campaign activities. However, the following average characteristics are considered*:
heating value above 2000 kcal/kg (8370 kJ/kg); content of combustible matter above 60%; content of non combustible solids below 5%; content of
non-combustible fines below 20%; moisture content below 30% by weight
Combustion performance: The medica waste incinerator shall be capable of reducing waste to ash not exceeding 10% of the total combustible
charges.
Outdoor installation. The medical waste incinerator will be installed outdoors. All incinerator components shall be suitable for but not
limited to outdoor shaded installation, including electric motors, be resistent to corrosion, moisture and related weather elements.Products of building and construction: The incinerator will have no asbestos, asbestos-containing materials, mercury thermostats, as well as mercury switches. Refractory materials will have the ability to fulfill appropriate standards under ISO TC33 and also CEN/TC 187.
Kinds of incinerator design acceptable: Dual-chamber controlled air incinerator or dual- chamber pyrolytic incinerator
WWW.HICLOVER.COM｜Waste Incinerators ｜Auto Roll Air FiltersNanjing Clover Medical Modern Technology Co., Ltd..
Tel: +86 -25 -8461 0201 Site: www.hiclover.com Mail: [e-mail safeguarded] Email: [e-mail secured]
HICLOVER now Provides extra parts consisting of:
— — Burners (diesel oil, LPG or natural gas)
— — Aspect for heaters
— — Fire ropes
— — Incinerator chamber maintenance products
— — Air Fan
Hiclover supply medical waste incinerators with ability 10kgs per hour to 500kgs per hr.
The burner with dual/double combustion chamber as well as dry filter chamber, two fuel burner from
Italy made, hot sale version for small scale waste result, the capacity is 30kgs per hour
and also 50kgs per hr.
We are famous small scale incinerator manufacturer and brand, dispatch incinerator productsand best services with lower price for customer all around the world.Just the way you can locate affordable incinerator to your local website?
Burner isn’t an economical apparatus, normally the very small scale model’s cost approximately $5,000 usd per unit
as well as huge scale version’s rate more than $50,000 usd each. Before buy a single unit incinerator,
you need to make clear adhering to goods:
A, burn what? Incinerator is a incineration tools, function is fire waste. What kind of
waste that you want to treatment? This according to the waste result each day or the waste quantity per
feed time, such as animal dimension. Incinerator use gas or oil fuel, usually, gas fuel is less expensive than petroleum and the smoke
cleaner than petroleum gas version. Some neighborhood website don’t have gas supply system.
As well as other technology products, such as electricity ( 220v, 380v), waste feed door kind, burner frame, etc..
Tel: +86 -25 -8461 0201
As well as other technology items, like power( 220v, 380v), waste feed door kind, burner framework, etc.
Nanjing Clover Medical Technology Co.,Ltd.Tel: +86 -25 -8461 0201
Mobile: +86-13813931455(whatsapp/wechat)
Website: www.hiclover.com
Email: [email protected]
Email: [email protected]
Items/Model TS10(PLC) TS20(PLC) TS30(PLC) TS50(PLC) TS100(PLC) Burn Rate (Average) 10 kg/hour 20 kg/hour 30 kg/hour 50 kg/hour 100 kg/hour Feed Capacity(Average) 20kg 40kg 60kg 100kg 200 kg Control Mode PLC PLC PLC PLC PLC Combustion Chamber 100L 210L 330L 560L 1200L Internal Dimensions 50x50x40cm 65x65x50cm 75x75x60cm 100x80x70cm 120x100x100cm Secondary Chamber 50L 110L 180L 280L 600L Smoke Filter Chamber Yes Yes Yes Yes Yes Feed Mode Manual Manual Manual Manual Manual Voltage 220V 220V 220V 220V 220V Power 0.5Kw 0.5Kw 0.5Kw 0.7Kw 0.7Kw Oil Consumption (kg/hour) 5.4–12.6 7.8–16.3 10.2–20 12.1–24 14–28 Gas Consumption (m3/hour) 6.2–11.4 8–15.7 9.8–20 9.9–26.1 10–32.2 Temperature Monitor Yes Yes Yes Yes Yes Temperature Protection Yes Yes Yes Yes Yes Oil Tank 100L 100L 100L 100L 200L Feed Door 30x30cm 45x40cm 55x50cm 70x55cm 80x60cm Chimney 3Meter 3Meter 5Meter 5Meter 10Meter Chimney Type Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel 1st. Chamber Temperature 800℃–1000℃ 800℃–1000℃ 800℃–1000℃ 800℃–1000℃ 800℃–1000℃ 2nd. Chamber Temperature 1000℃-1200℃ 1000℃-1200℃ 1000℃-1200℃ 1000℃-1200℃ 1000℃-1200℃ Residency Time 2.0 Sec. 2.0 Sec. 2.0 Sec. 2.0 Sec. 2.0 Sec. Gross Weight 1500kg 2200kg 3000kg 4500kg 6000kg External Dimensions 140x90x120cm 160x110x130cm 175x120x140cm 230x130x155cm 260x150x180cm
