nanjing clover incinerator price
Hazardous medical waste:
Clinical and related waste, arising from medical, nursing or comparable practices and waste
2. The unit should function wit. No fuel and use only 120V or 220V electricity for the blowers.
grease, and paraffin based xpired medicines.
Expired and/or polluted fod:
Spoiled fresh food or unusable MRE’s (Meal Ready for Eat – dry food)
Onsite Training and Assem Choice for Industrial Incinerators
I. The bidders must includ 1a cost in their offer for training in a central location ( Goma or
Containing toxic material and/or heavy metal and/or emitting low radiation.
Employed battery cells:
Dry battery, UPS battery or other forms, unsorted waste batteries/ battery cells, containing
Bukavu) approximately 15 staff in the operation and maintenance of the
Tank (10-500 litres) and generator (3 –40 kV) set that may be carried on the trailer with the
For water purification and photographic consumables and plastic material, empty
Compressor oil, Freon, used in some older refrigeration units, Insecticide liquid/spray, air
Blend spray and other similar chemicals.
Contaminated fuel:
equipment.
Smart Ash Incinerators
1. Size requirement for the incinerators is that the device works with a 55 gallon open ended
And gearbox oil (approximately 80%) contaminated by a mixture of white spirit and acetone (approximately 51%), hydraulic liquid (approximately 5%).
Contaminated water:
Waste oilshvater, leaches, hydrocarbons/water mixtures, emulsions and leachate.
Contaminated soil:
Soil polluted by gas, oil or 11 chemicals.
Rags, Absorbents, Cardboard, oil and fuel filters, air filters are not consider as hazardous substances.
Electronic waste:
Waste electrical or electronic appliances or assemblies, including printed circuit boards,
If there are any seller suggested spare parts, that price and list should be included as an alternative in the offer.
7). The incinerator should be capable of burning any of the hazardous wastes listed in the
Contaminated soil polluted by chemicals which needs to be recycled in landfill.
Incinerator so that the unit requires no external electrical power source.
9.) The incinerator should be trailer mounted so that it is a po
Hazardous Waste to be Incinerated
Hazardous Good chemical:
Different types of combustible solids, used textiles, grease, and toner cartridges, chemicals
Large incinerators – INDUSTRIAL INCINERATORS – specs below. The bum rate should be 80 LL 100 kg/ hour.
4) The primary chamber shouId have an operating temperature of 900 -1200 degree C.
5) The incinerator should despise a high temperature secondary chamber and 2 second gas
4. Each unit should come witH two steel drums, so that a spare drum can be obtained.
Spare Parts Option
Materials which are hazardouy.
subsequent section.
8) The incinerator should be capable of burning diesel oil and should include a bigger fuel
Mainly diesel or gasoline contaminated by water or solvents.
Employed and/or Contaminated oil:
Used motor oils and/or mineral oils unfit for their originally intended use. Mainly motor
Solvents, Synthetic Liquid for Break Systems, Aircraft De-icing Liquid, Hydraulic and
Retention time in 850- 1150 degree C so that it is suitable for high risk substances.
6). The incinerator must have temperature monitoring and thermostat control for ease of
Plastic/metal cans that still contain remnant hazardous material, oil absorbent.
Hazardous liquid compound:
Largely different types.
Generated in clinics throughout the investigation or treatment of patients (bio hazard).
Expired drugs, strong:
Waste pharmaceuticals, drugs and medicines, including drugs that are sensitive.
Expired drugs Iiquid:
Waste liquid pharmaceuticals, different type liquid chemicals for treatment, medical
Contaminated soil—replaced and treated on site.
3. The device should be capable of burning oil contaminated wastes and medical wastes using a moisture content of 0-15%J
steel drum.
I. The bidders should includ 1a price in their offer for training in a central location ( Goma or
Bukavu) approximately 15 staff in the operation and maintenance of the
equipment.
Smart Ash Incinerators
1. Size requirement for the incinerators is that the unit works with a 55 gallon open ended
steel drum.
2. The unit should operate wit. no fuel and use only 120V or 220V electricity for the blowers.
3. The unit should be capable of burning oil contaminated wastes and medical wastes with a moisture content of 0-15%J
4. Each unit should come witH two steel drums, so that a spare drum is available.
Spare Parts Option
If there are any vendor suggested spare parts , that list and price should be included as an option in the offer.
