incinerator - HICLOVER Incinerator

waste

INCINERATOR SPECIFICATION Capacity UPTO 20 kg/hr

Aug 26, 2024 by hiclover 0 Comments #incineration, #incinerator, #medical waste, #waste

Size: 940 x860x2700 mm
Material: STAINLESS STEEL STACK, REFRACTORY CONCRETE LINING SPECIAL INSULATION MATERIAL
With burner: 15 C 20 KW
Temperature: PRIMARY CHAMBER = 800°C AND SECONDARY CHAMBER = 850 – 1200° C
Sufficient heat generation for secure and complete combustion 600-800 °C in the first chamber and >1000 °C in the second chamber
Easy transportation on standard EURO-pallets
Constructed in a modular fashion easy on-site movement and assembly with a minimum of equipment and technical skills;
For the destruction of problematic waste like sharps, amputates and body parts, wet or moist matter;
Off-gas quality: moderate smoke emissions during one quarter of the total incineration time; no visible emission during three quarters. AS PER INTERNATIONAL STANDARDS
The remaining ash approximately 5-10% in weight and below 1% in volume of the original waste AS PER INTERNATIONAL STANDARDS
Chimney height at least 5 m above the incinerator 5m ABOVE FROM THE GROUND
Temperature resistance of the lining at least 1,200 °C

waste

N.D. could receive Ebola waste from Calif.

Aug 23, 2024 by hiclover 0 Comments #incinerate, #incineration, #incinerator, #medical waste, #medical waste incinerator, #waste, #waste-incinerator

FARGO, N.D. — California health officials have given notice that North Dakota is one of six states that could receive Ebola medical waste in the event the state has any material to incinerate.

In a notice posted last week, the California Department of Public Health listed North Dakota as one of six states where California sends medical waste to be incinerated when onsite disposal is not available at medical centers.

Healthcare Environmental Services Inc., located at an industrial park at 1420 40th St. N. in Fargo, operates a medical waste incinerator that also accepts waste from other locations.

Calls to Healthcare Environmental Services on Tuesday afternoon were not returned.

The company is owned by Sanford Health. A Sanford spokeswoman said it could not immediately comment on the possible incineration of Ebola waste from California at the Fargo facility.

So far, California has no known Ebola cases, according to the state health department, which spelled out its interim guidelines for safe handling of medical waste in an alert to providers and others.

In another development, public health officials are monitoring two North Dakota residents who recently returned from countries in West Africa that are battling the Ebola epidemic.

Neither of the two residents is running a temperature or showing any symptoms of an Ebola infection, which can include diarrhea, joint and muscle aches and abnormal bleeding.

“They’ve just recently traveled to the area,” said epidemiologist Michelle Feist of the North Dakota Health Department. “They pose no risk to the community.”

Health officials are not releasing information about where the two people reside.

Public health officials in Minnesota and South Dakota also are monitoring residents in those states who have recently visited Guinea, Liberia or Sierra Leone in West Africa, where an outbreak of Ebola has killed about 5,000.

State health officials are contacted by the Centers for Disease Control and Prevention when someone is entering the United States from those countries through five major international airports.

“We are doing monitoring,” said Sam Brungardt, a public information officer for the Minnesota Health Department.

On Monday, Minnesota health officials announced that they were monitoring one resident who had traveled to West Africa, but the list of people to monitor is growing.

“It has grown, and it will continue to grow as we get reports from the CDC,” Brungardt said. “There’s people who are returning from these three West African countries every day.”

So far, none of those being monitored for signs of fever with twice-daily temperature checks show any sign of infection, he said.

As a precaution, however, they will continue to be checked during the 21-day observation period, generally regarded as the incubation period for the Ebola virus.

South Dakota health officials also are monitoring someone who recently returned from West Africa, but is not showing symptoms.

by: http://bismarcktribune.com/news/state-and-regional/n-d-could-receive-ebola-waste-from-calif/article_10e0e242-5f2c-11e4-8ff8-8ba8bab48ce3.html

waste

Norfolk incinerator bill wrangle could continue until after Christmas

Aug 20, 2024 by hiclover 0 Comments #incinerator, #medical waste, #waste

Norfolk County Council voted by 48 votes to 30 to terminate the contract for the proposed incinerator at Saddlebow at an extraordinary meeting in April.

Council officers had said that, due to delays in securing planning permission, the controversial project no longer offered good value for money, and councillors agreed to ditch it.

In May, the estimated cost of cancelling the contract was put at just over £33.7m. That included £20.3m to Cory Wheelabrator – the company which would have built and run the burner; public inquiry costs of £1.6m and estimated interest rate related costs of £11.8m.

The first £11.8m of that bill was paid in July, but council bosses have been locked in months of arguments about the fine details of the contract and how much that means the council must pay Cory Wheelabrator.
In September, it was announced the compensation would be “considerably lower” than the £20.3m originally estimated.

But at a meeting this week, Tom McCabe, interim director of environment, transport and development at Norfolk County Council, told councillors the final figure had yet to be agreed.

He said: “The discussion with Cory Wheelabrator is ongoing and we would hope to have it resolved by Christmas.

“It’s premature to say it will be done by then, though. It could be done before that or it could drag on for longer.”
Norfolk County Council is still trying to come up with a long-term solution for how to deal with the county’s waste.

But, in the short-term, a deal has been struck with their counterparts in Suffolk for rubbish to be burned at a newly-built incinerator in Great Blakenham.

Over the next year, about 40,000 tonnes of Norfolk’s residual household waste will be hauled down the A140 to be burned at the plant.

• What do you think of the incinerator saga? Write, giving full contact details, to Letters Editor, Prospect House, Rouen Road, Norwich NR1 1RE.
by: http://www.edp24.co.uk/news/politics/norfolk_incinerator_bill_wrangle_could_continue_until_after_christmas_1_3823390

waste

Supply, Installation and Commissioning of DIESEL FIRED INCINERATORS

Aug 17, 2024 by hiclover 0 Comments #incineration, #incinerator, #incinerators, #medical waste, #waste

Supply, Installation and Commissioning of DIESEL FIRED INCINERATORS
Medical Waste Incinerator, 100 to 120 Kg/hr
Application   For incineration, general and pathological
Capacity    100 C 120 kg/h burn rate
Type Two  combustion chambers type; primary  and Secondary, controlled/forced combustion air type with a flue gas emission scrubbing unit
Operating time                Minimum 8 hours daily
Operating temperature     From 850 0C to 1200 0C, Automatic controlled
Residual Ash                    5 to 10%
Construction Constructed from heavy duty mild or aluminized  steel
Or equal and approved equivalent

Insulation material            Refractory material lining similar or equal to calcium
Silicate and hot face combination of heavy duty brickwork
Internal Construction        Fixed hearth type complete with gratings, concave bottom and charging door, lined with refractory material
Charging Door                   Suitable for manual loading of wastes and with smooth
Dear seal equivalent of Ceramic seals with hinges.
Door Lock                          Automatic, Electric type
Ash removal door    Provided, for removing resultant bottom ash leftovers                              from the Primary chamber
Gratings    Provided
Loading Manual loading of waste
Primary Burner                        Fully automatic, with fuel, temperature and speed  controls with ignition system  flame detector                                                         Air fan Complete with safety features, flame failure                                                                    Diesel fired fuel injector type
Flange mounted
Blower   Provided.  3 phase for supplying excess combustion air through the distribution system with speed control system
Temperature Minimum exit 850 0C
Observation port To be provided with protective glass type
     3.3    Secondary chamber

waste

Pyrolysis Deemed a Viable Alternative to Incinceration

Aug 12, 2024 by hiclover 0 Comments #hazardous waste, #inceration, #incineration, #incineration facilities, #incinerator, #incinerators, #medical waste, #pharmaceutical wastes, #temperature incineration, #waste

Researchers at the University of York have concluded that PyroPure (UK) technology has the potential to transform the way in which hazardous waste is destroyed in clinical environments and say pharmacists, manufacturers and hospitals throughout the UK should consider trialling the system.

The announcement follows a six month Innovate UK-funded Knowledge Transfer Partnership project in which a team of leading scientists from the University’s Environment Department and Centre of Excellence in Mass Spectroscopy confirmed that the system helped to destroy active pharmaceutical ingredients (APIs) found within pharmaceutical waste on-site.

A total of 17 of the most thermally resistant APIs were selected for the trial, which revealed that PyroPure technology destroys over 99 per cent of APIs in 10 of the 17 tested and an average of 94 per cent of the ‘worst case’ pharmaceuticals.

Professor Alistair Boxall of the University’s Environment Department and former member of the DEFRA Hazardous Substances Advisory Committee headed the study. On the future of PyroPure as an alternative to high temperature incineration, he comments:

“There are big concerns over the negative impacts of pharmaceuticals on the natural environment. Inappropriate disposal of pharmaceuticals and emissions from manufacturing sites are thought to be important contributors to these impacts. Our work demonstrates that PyroPure could help reduce the levels of pharmaceuticals in rivers and streams and have big benefits for ecosystem health. The system also provides a range of other environmental and economic benefits that could radically change how waste of this nature is collected and destroyed going forwards. With PyroPure technology, hazardous waste and controlled substances no longer need to be transported across the country to incineration facilities, thus reducing the associated costs, carbon emissions and risks associated with moving waste from its point of origin to its point of disposal.”

Currently in the UK, pharmaceutical wastes are only disposed of in large-scale, high-temperature incinerators, which can be up to 200 miles away from where the waste is generated. The Environment Agency has previously indicated that PyroPure, which relies on pyrolysis, a thermochemical decomposition process using high temperatures and an absence of oxygen, followed by catalytic conversion to clean and convert the gases, could be the first viable alternative to high-temperature incineration for pharmaceutical wastes.

On the trial’s success, Peter Selkirk, PyroPure Ltd’s Executive Chairman, adds: “This is a huge step forward for PyroPure technology and the healthcare sector. For too long now, we have been overly dependent on incineration as the only viable route in which to dispose of hazardous waste. Not only is it expensive but it’s also open to security breaches, particularly when the waste needs to be transported long distances. Now that PyroPure is a proven technology I’m confident that this breakthrough will pave the way for a new approach to waste disposal and irrevocably change the model for waste collection within clinical environments across the world.”

The trial, which formed a Knowledge Transfer Partnership between PyroPure Ltd and the University, also revealed how on-site energy recovery during the PyroPure process is at least 75 per cent compared with 20 per cent for a high-temperature incinerator.

Each PyroPure unit is the size of a chest freezer. The user simply opens the unit’s lid and places the waste within the chamber before initiating the process of pyrolysis to destroy it.

by: http://www.pollutionsolutions-online.com/news/hazardous-waste/20/pyropure_ltd/pyrolysis_deemed_a_viable_alternative_to_incinceration_according_to_uk_university/32282/

waste

England’s trash generating Danish heat

Aug 9, 2024 by hiclover 0 Comments #hazardous waste, #incinerate, #incinerator, #incinerators, #medical waste, #waste

Power in Denmark is increasingly being generated in plants burning waste imported from England. The practice is being called an economical and environmental boon on both sides of the equation.

The AVØ incinerator in Frederikshavn produces heating and power for the area by burning trash from England.

“It is mainly construction waste like pieces of wood, cardboard and plastic from Manchester,” AVØ operations manager Orla Frederiksen told DR Nyheder. “I guess we have 600 tonnes here that provide a good combustible mixture we can then turn into district heating and power.”

Good for the bottom line
The incinerator in Frederikshavn has doubled its imports of the English waste in the past year.

Incinerators in Aalborg and Hjørring are also burning British trash.

“The heating we produce using the waste is cheaper than what we can generate with natural gas,” said AVØ head Tore Vedelsdal. “And the British are interested because they lack incinerators and pay heavy taxes on landfills.”

Good for the environment
Vedelsdal said that the environmental angle works for both countries.

“They save on having to bury the waste and we save on the consumption of natural gas,” he said.

READ MORE: Denmark pays most for electricity

Environmental protection agency Miljøstyrelsen said that last year up to 200,000 tonnes of non-hazardous waste from England was incinerated in Denmark – nearly six percent of the total volume of combustible material used.

by: http://cphpost.dk/news/englands-trash-generating-danish-heat.11398.html

waste

INCINERATOR SPECIFICATION Capacity UPTO 20 kg/hr

Aug 6, 2024 by hiclover 0 Comments #incineration, #incinerator, #medical waste, #waste

waste

Ebola: Southport firm leading the fight in global health crisis

Aug 3, 2024 by hiclover 0 Comments #incinerator, #incinerators, #medical waste, #waste

Sales and marketing manager Paul Niklas said they had more than a hundred orders from global organisations and aid agencies, including the United Nations and the Red Cross.

He also said most of their workforce was dedicated to manufacturing the incinerators.
The larger ones can burn up to 1,000kg of waste an hour, smaller ones up to 400kg per hour.

Mr Niklas said: “We feel very proud of the fact that they have come to us and that we have a product that is part of the solution.

“Because this has to be contained at the source.

“As soon as you start trying to move waste, it can spread further and further.

“Our incinerators burn at 850 degrees Celsius which burns the toxins, then in the second chamber they burn the gases from that at 1,200 degrees so what is coming out of the chimney is clean.

“And our incinerators are mobile, too, so they can be taken to the source.”
Calls for the incinerators started a few months back when the Ebola crisis was just emerging. Since then they have manufactured and sold more than 120 incinerators to be shipped out to West Africa.

“Their engineers usually go out to help with installation but because of the Ebola threat, engineers employed by aid agencies and organisations are being sent to be trained up at the plant in Canning Road Industrial Estate instead.

Mr Niklas added: “They first contacted us when the outbreak began a couple of months ago. But we are geared up for these things, anyway. The last time demand was like this was the Iraq War. We’ve set up a separate plant so when it does happen we can manage it.”

British Army medics were sent to Sierra Leone yesterday as global leaders promised to step up the international community’s efforts to halt the spread of the disease which has so far taken more than 4,000 lives.

waste

Controlled air medical waste incinerator designed for incineration of bio-medical waste

Jul 29, 2024 by hiclover 0 Comments #incineration, #incinerator, #medical waste, #waste

Controlled air medical waste incinerator designed for incineration of bio-medical waste generated at a blood-processing center. The waste to be treated mainly includes bio-waste (i.e. bodily fluids), infectious and hazardous waste such as syringes, needles, and other medical waste (i.e. silicon rubbers, plastic, textiles, papers, packs, etc.)

Operational Specs Physical Specs
Combustion Chamber Volume (m3) 8.80m3
Burn Rate* up to 1,500kg per hour
Average Fuel Consumption 65 kg per hour or more (7 diesel burners)
Operational Temperature 850 – 1320°C
Gas Retention in Secondary Chamber Large secondary chamber
Temperature Monitoring Yes
Average ash residue (%) 3%
Thermostatic Device Yes
1000l diesel flue tank
Venture gas scrubber
Hydraulic Ram Feeding System
Diesel Powered Large Incinerator
Minimum Specification Required

Standards
1) Bidder or Manufacturer ISO 9001 Certified
2) Respecting international emission standards
Electrical characteristics
3) A 230V, 60Hz single-phase electrical source.
4) Protections against over-voltage and over-current line conditions.
5) Compliance with applicable Ghanaian standards and regulations.
Operational characteristics
6) Two-stage incineration with dual chamber combustion
7) Burn rate: 15 – 20 Kg/h
8) Capacity: not less than 130 L
9) Concentrations of most pollutants in stack gases below detection limits
10) Diesel fuel
11) Electronic system control
12) Easy to operate and minimal training
13) Any accessory or dedicated device necessary to the proper functioning and utilization of the equipment included

PLEASE REFER TO BROCHURES ATTACHED FOR DETAILED SPECIFICATION

waste

Supply of Inclinators for Interim Arrival Domestic Terminal Project

Jul 26, 2024 by hiclover 0 Comments #incinerator, #medical waste

CMC Services for Inclinators for 3 years including all spares, consumables, Skilled Manpower, tools and tackles all complete. As per Scope attached as Annexure
Design, Manufacture, Supply, delivery to site, installation, testing & commission of All weather proof Passenger Inclinators in accordance to the Scope and outline specifications mentioned in Annexure
Spesifikasi Incinerator 100kg/jam

Spesifikasi dan Daftar Material

Dimensi dan Power Capacity

Nama Barang                                : INCINERATOR
Type / Model                 : PWR-INC-KMN 10
Kapasitas                                 : 100kg/Jam (1 m3)
Length                               : 288 cm
Width                                : 147 cm
Height                                    : 163 cm
Height of Chimney std            : 700 cm
TOTAL WEIGHT                   : 8000 kg
Panel – timer                 : Digital Included Auto Alarm
Finishing                            : Hot endured paint
Fuel tank                          : 200 Liter
Covering Element from steel   : 3-8mm
Banyaknya Burner                   : 2 pcs
Banyaknya Blower              : 2 pcs
Max. Fuel consumption           : 15-30 Liter/Jam
Max. Elektric consumption : 1100 Watt
Bahan bakar              : Kerosene / Diesel (solar)
Voltage                              : 220 V / 1 phase / 50 Hz

Material

1. PANEL CONTROL

Type                       : Digital
Buatan                    : Local KAMINE ( Panel dan Incinerator satu Merek)
Voltage                   : 220 V / 1 phase / 50 Hz
Safety operator       : Emergency Stop
System                    : Microkontroller
Pengoperasian         : Semi Automatic
Temperatur control  : Digital Coupler Type
Control panel : Manual dan automatic
Tipe : Self Standing Type / Wall Mounted Type
Material : Mild steel
Thermocontrol : 2 (Dua)  1200 ºC
Set of timer : 0- 2 jam
Tombol saklar : on/off

2. CONTRUCTIONS

Fire Brick                 : SK 34
Castable                          : R 16
Castable                    : R 14
Isolator                   : Insulating Brick serat tahan panas Keramik 1.450 ⁰ C
Element from steel     : 3-8 mm
Finishing                     : Cat Fetalit coating, Epoxy Resin (hot-endured paint)
Total berat keseluruhan     : 8.000 kg
Ketebalan Dinding Dalam : 21 Cm

3.DIMENSION OF CHAMBER (Dimensi Ruang Bakar)

Chamber 1 Ruang Bakar Utama : 100 x 100 x 98 cm = 980.000 cm3 = 0.98 m3
Chamber 2 Ruang Bakar Kedua: 40 x 100 x 98 cm = 392.000 cm3= 0.39 m3

4. EXHAUST STACK (Chimney)
– Diameter (inch): Ø 10″, 8″
-Panjang: 700 cm (7 m) dari permukaan tanah
-Cerobong pertama dengan system Cor tipe MWHT
-Material Mild steel ( Baja Hitam )

5. INSTRUMENTATION & KONTROL
                      1. Suhu Control: Optimal
                           – Model: Digital
                           – Jumlah (unit): 2 (dua) unit
                           – Kontrol Mode: On-Off
                      2. Power Supply (volt / fase / herts): 15A / 220 V / 1 Phase / 50 Hz
                      3. Panel kandang: Mild Steel + powder coating
                      4. Thermocouple: K
                           – Jumlah: 2 (dua) unit
                           – Bahan: Stainless Steel + Ceramic
                      5. Timer: 0-2 Jam
                      6. De-ashing: Manual
          7. System pembuangan Abu 2 unit
6. PINTU
Pintu    : Baja ringan dan Linning dengan castable
System : Double lock system ( penguncian ganda )

7. AIR SUPPLY SYSTEM
Model / Type: fan sentrifugal 3 “
Kapasitas (m3/minute): 3.000 m3/mnt
Statis Tekanan (mmAq): 98 mmAq
Power : 200 watt/unit
Jumlah (unit): 2 (dua)

8. FUEL SYSTEM
Pembakaran Burner:
Type: Gun type OM 2N
Bahan Bakar: Diesel Oil / Kerosene
Konsumsi Bahan Bakar: 10-18 ltr / jam
Power : 250 watt
Jumlah unit : 1 unit

Type: Gun type OM 2N
Bahan Bakar: Diesel Oil / Kerosene
Konsumsi Bahan Bakar: 10-18 ltr / jam
Power : 250 watt
Jumlah unit : 1 unit

9. THERMOCOPLE
Ruang bakar pertama dan kedua
Tipe : K
Protective tube : Stainless steel + ceramic
Max. temperature : 1200 ºC
Jumlah : 2 unit
Sistem pemberian umpan : Manual
Sistem pengeluaran hasil : Manual

10. TANGKI BAHAN BAKAR
Material : Mild steel
Kapasitas : 200 liter

Horizontal Autoclave 155 Liters
Sterilizing chamber:  Steam-heated via double back wall with integrated steam generator
Door and lock:  Hinged door with quick lock and safety lock
Door seal: Blow-out design, even closure, automatic return without vacuum system
Temperature measurement technology: 2 independent sensors for controlling the steam generator + 1 sensor for sterilizing chamber
Preheating key
Security key switch saves program settings
Sterilization phase  indicators
Pressurized-air supply: integrated Compressor for door control circuit and pneumatic set valves
Feed water consumption per batch 0.7 to 5.6 liters
Cooling water consumption per batch for spent-steam condenser 10–25 l at temperatures 15 °C
Water-level control:  Within the double back wall
Low-water safety fuse: Heater Over temperature monitor
Sterile venting:  Membrane filter 0,2um, 0.1 m² hydrophobic, steam-sterillisable, retention  99.5%
Control circuits: separate for heater and door seal, process control and monitoring
Timer Program start by date and time
Selectable Acoustic alarm at program end
Transport security device for door
Three Autoclave able (Polypropylene or stainless steel) Pans 5-10L

Tag: incinerator