waste

Destroy the wasted materials or chemical uses in pharmaceuticals

Aug 5, 2019 by hiclover 0 Comments #epost

Destroy the wasted materials or chemical uses in pharmaceuticals through Primary & Secondary combustion Chamber’s with working

temperatures are 850° C & 1100° C or 1200° C & 1400° C. The incinerator design must meet with ISO, OSHAS, Emission

Standards, Norms and Guidelines. The incinerator design must have heat recovery system and low fuel consumption system while

incineration.

The machine should have following features in its respective parts –

Feeding system

Automatic/ and manual control system

Automatic heating control system

Easy maintenance

Outdoor type IP grade material

Heat recovery system

Low fuel consumption system

Combustion chamber dual type with heat recovery system

Burner system with economizer / low fuel method

Scrubbing system as per regulation

Easy dust collecting system

Chimney (height 50 meter)

Record printing system

Incinerators to be suitable for the professional disposal of clinical & medical waste / garbage with a higher load capacity in the range of approximately

1000-1500 Kg. The durable, self-contained incinerators shall offer an effective and highly efficient, safe disposal and to be manufactured according to applicable international directives, e.g. CE, EU, etc.

Type of Fuel: Diesel or Petrol or Natural Gas. Temperature controlled,

efficient burner for optimum fuel economy. Units to be pre-assembled,

pre-piped, pre-wired and tested before transport / export.

Within the framework of an environmental and medical equipment & technology consultation and joint purchasing, this Procurement Bureau invites applicants for pre-qualification in the aim of primarily selecting capable companies to bid for the above tender.

waste

Mobile Diesel Fired Incinerator in container

Aug 3, 2019 by hiclover 0 Comments #epost

Mobile Diesel Fired Incinerator in container,

supplied with the following specifications:

complete with constant ventilation fans for extraction,

factory installed inside one 20ft ISO container complete with lighting, ventilation fan, fire security, 3 access doors, and a 1200 litre fuel tank complete with a piping.

Fully containerised mobile waste management solution for medical, animal, and industrial waste applications.

Installed in Container (ISO) : 20”

or its nearest equivalent model “

Tender Technical Specification

Destruction rate of 50kg/hr

Hot Hearth Principle

Refractory insulation:

a. Silicon carbide floor

b. Minimum 22mm insulation thickness

c. Brick lined Refractory insulation

d. Three layers of refractory insulation

e. Temperature Rating 1650 deg.C

f. 42% alumina fire bricks

Primary Chamber:

a. 120Kw Burner

b. Dedicated independent fan system, damper controlled.

c. Thermostatic Sensor

d. Dimensions – 700mm x 700mm x g00mm

e. Square Chamber with curved floor for liquid centralization

Hot Hearth Chamber:

a. 120Kw Burner

b. Thermostatic Sensor

c. Minimum Temperature of 1100 deg.C as per WHO guidelines.

d. Two second retention time – Proven with CFD modeling.

Steel Construction:

a. constructed from 8mm & 1Omm steer plate

b. Painted two pack paint system, red with black flashing

Control Panels:

a. Door dimensions 700mm x 700mm

b. Front mounted ash collection box.

Control Panels:

a. AiController

b. Plug and play

c. Threezone monitoring of:

i)Primary chamber

ii) Secondary chamber

iii) Hot hearth

d. Digital display

e. Burner on-off indication lights

f. Timer

Chimney:

a. Mild steel painted red

b. Refractory insulated with 50mm of insulation.

Unit Dimensions:

1840mm x 1 ‘1 50mm x 1950mm high.

Safety:

a. Burner door cut-off switches

b. Fire valve fitted to fuel system

c. Maximum noise at 1m x g0 decibels

d. Exterior temperature 70 deg.C Max

waste

200 BEDS HOSPITAL INCENERATOR TECHNICAL INFORMATIONS

Aug 3, 2019 by hiclover 0 Comments #epost

1) Policy

– Waste disposal management shall be taken special note to prevent hospital infection.

– Infections wastes shall be managed, stored strictly and burned by a incinerator located at hospital site.

2) Waste Disposal Plan

a) Classification

– Medical wastes in hospital are classified as follows;

Infections Waste	Specially-controlled waste	Organ, needle, etc.
	Industrial waste	Rubber gloves, etc.
	General waste	Gauze, etc.
General Waste	Plastic, Rubber	Infusion bottle, etc.
	Paper, wood, Vinyl	Voucher, etc.
	Metal, Glass	Can, Glass bottle

b) Infections Waste Disposal

– Segregation: Infections waste disposal shall be segregated appropriately and packed in particular containers and delivered to particular storage. The segregation, packing and delivery shall be operated appropriately at each room such as outpatient, operation theater, blood collection room and dialysis room.

– Precaution: Infections waste shall not be place in other containers on the way of segregation, packing and delivery.

– Storage: Infections waste shall be stored at the storage in hospital site temporarily until infections waste is incinerated.

– Incinerator:

It is designed to sterilize medica
l waste , reduce its volume , and render its components unrecognizable all in one fully enclosed and automated system.

It combines direct heated steam , high pressure and shredding to treat infectious materials.

The contaminated waste is loaded into the upper stainless steel chamber where a heavy-duty shredder reduces the waste into small pieces. Using gravity, the processed material falls into the treatment chamber where every piece is steam heated to 134 and pressurized to 3 to bar for 20 minutes. The operating conditions are continuously monitored and validated to achieve complete sterilization.

The 60 minutes average duration process cycle is totally automated. A computerized system monitors the process and automatically prints a report with the essential sterilizing parameters at the end of the cycle for accurate record keeping.

The capacity is between 500 to 600 kg/cy.h or more.

Treatment cycle:

1- Loading ; the contaminated waste is automatically -loaded into the chamber of the unit

2-Shredding; the heavy-duty shredder cut the material into small pieces and features a unique reversing system to avoid jamming

3-Heat; saturated pressurized steam raises the temperature to 134 C and the pressure to 3 bar

4-Sterilization; the sterilization comes into direct contact with the shredding material (134 c , 3 bar) for 20 minutes

5-Cooling; temperature is lowered to 80 C by spraying cool water onto Double jacket of the treatment vessel, simultaneously, the unit returns to ambient pressure

6-Draining; the steam is condensed to water and discharged with the cooling water to the sanitary sewer system

7-vacuum; the remaining residual steam is vented out through a vacuum pump

8-Unloading; a digital signal informs the operator that all safe operating conditions have been met

The condition unlocks the unit and allows gravity unloading of the treated waste into a container

Teaching Specification

General Characteristics

Operational temp. max	160 C
Max Weight when filld with waste For a special hydraulic test. Kg	10500
Stress. Kg/ cm³	3.5
Steam Pressure. Bar	8
Max Steam Flow Kg/h	500
Compressed Air Bar	6
Electricity 380 V/3 – phase Surge Protection system	35KW
Operating Characteristics
Average Cycle Time. minutes	60
Process Wight Capacity . Kg	500 – 600
Density. Kg/m3	100
Average process wight capacity Kg./cycle microbial inactivation	200-300 8log 10
Waste volume reductin	80%
Consumption / Cycle
Steam. Kg	40
Electricity . KW/h	9
Water Liters	500

waste

SOLID WASTE INCINERATOR Feeding Capacity 200 to 220 Kg

Jul 31, 2019 by hiclover 0 Comments #epost

Burn Rate * 60 Kg / hr

Ingredients to be burned Cotton, Rubber, PVC Sheets, PE Gloves, Oil, Plastic Bottles, Paper etc.

Chambers * Dual Chamber.

1: Primary Controlled Air

2: Secondary Excess Air

Temperature Monitoring Required

Temperature Control to Primary & Secondary Chambers Required

System Status & Alarms Required for all necessary parameters.

Fittings & Accessories Complete Package is required ( Including Nozzles & Flanges etc.)

Installation Requirements. As low as possible . Almost Plug & Play type.

Dimensional Sketch, Operation & Installation Manuals. Required

Off – Gas System Required

Heat Insulation Required for indoor installation

Delivery Karachi Sea Port – Pakistan

The details of Components of incinerator is as follows:

Component Name Features Range.

Primary Chamber Temperature Required* 800 – 1000 deg C.

Heating Source Natural Gas

Secondary Chamber Temperature * 1100 – 1300 deg. C

Heating Source Natural Gas + Propane or Fuel Oil as an additional source

Off – Gas Residence Time 2 Seconds.

Refractory Material Material * Alumina ( 56 – 80 % Pure )

Lining * SS 316L

Life Span * 10 – 15 years.

Rating Temperature 1600 – 1800 deg. C

Media Slightly acidic

Insulation Material Ceramic Fiber

Thickness 25 “ minimum

Feeding & Ash Removing System Air Tight ventilating locked doors ( Feeding from Top will be preferred)

Spares Required for 5 Years trouble free operation

waste

Fw: waste disposal range treatment capacity: 35 kg incinerator

Jul 29, 2019 by hiclover 0 Comments #epost

Suitable models for required waste disposal range.

Combustion efficiently per hour based on 08hrs operation and its fuel category

installation method C Mobile type/ possibility of structured inside container / structured in permanent base

Fuel consumption details consisting electricity

Capacity: 20KG/Hr, Temp Range: 600 Deg. C C 1100 Deg. C

Fuel Supply: Natural Gas/Diesel

Dual Combustion Chamber Complete Scrubbing System (Dual

Resultant Gas Washer), Dual Blower, Chimney Height: 8m

Electric Supply: 220/240Volt, Single Phase

Waste treatment capacity: 35 kg / h

The combustion chamber is thick steel plate (3 to 10 mm ) with reinforcements, specially built .

Front loading with watertight door mounted on hinges, locking screw wheel , flexible gasket and an insulating refractory lined

An internal lining of refractory concrete containing 42% of H2 03 (alumina ) and 100 mm thick walls.

fibrous insulation panels made ??of calcium silicate with a thickness of 75mm .

Automatic Burner ( diesel or gas must be specified in the order ) with flames diving in one piece monoblock with an electronic

ignition system , permanent ventilation control valve and isolation valve.

combustion floor made ??in carborundum , preventing binding of glass and slag.

Equipped with two (02) chambers

Fuel: Gas or butane gas

Power supply: 220 V 50 Hz single-phase

Capacity 100 Kg (0.18 m3)

Electric starter

・ The room dimensions are 6.64 m width x 6.61 m length x 6.03 m height at lowest point/per one incinerator. Are these

dimensions sufficient for complete one medical incinerator 150 kg/hours (1.5ton/day).

・ Please, provide complete data about chemical consumption required for waste incineration, gas emission treatment

,liquid waste and generated soiled wastes handling and/or, treatment .

・ Please, confirm that the exhaust gases are treated by alkaline scrubbing (wet or dry).

waste

Solid waste incinerator placed in a container

Jul 28, 2019 by hiclover 0 Comments #epost

Solid waste incinerator, productivity 100kg/h placed in a container. Dimensions: 2,45×12,2m and 2,9m in height.

Operates natural gas with the pressure of 0.005 MPa and consumption of 0,21-0,23 m3 per kg of waste. Installed power C 55 kW. Total 3 units.

Fuel capacity:200l or more

Incinerator has a temperature monitoring system in place

Wet scrubber capable of removing sulpur dioxide in the fumes

Water capacity of 2000l or more

Incinerator temeprature above 950 degree celsius

Incinerator used a dual chamber system for incinerator

Capacity per hour at least 25kg

1. A combustion chamber :

a. watertight door for manual loading of waste.

b . A burner start is limited to inflammation of waste .

2. A camera post-combustion gases :

a. burner combustion , low power .

b . An injection device air for total recombustion of the gases .

c . An input device cooling air of the combustion gases.

d . A smoke evacuation duct .

3. A control panel ensuring complete combustion cycle .

The incinerator meets as indicated on waste incineration .

They will not burn plastics, packaging except that the amount so small that gases need not receive any treatment, secondary combustion chamber to 1100C handles everything ..

Water waste incinerator, productivity up to 3m3/h and placed in a modular building. Dimensions: 8,2×5,9m and 5m in height.

Operates natural gas with the pressure of 0,016 MPa and consumption of 0,35m3 / kg of drainage. Installed power C 35 kW. Total 1 unit.

waste

Hot Medical Waste Disposing Machine

Jul 27, 2019 by hiclover 0 Comments #epost

Type Pyrolytic:- Hot Medical Waste Disposing Machine

Operation Condition 8-16 Hr /day

Controls Built in data recording

Incinerator

/Primary Combustion Chamber Type: continuous loading

Capacity/Burn rate per hour: 250 -300kg/hr

Temperature: 900-1200 oC

Material:

External- 3 layers

Internal lining: a fire proof material of pre-fired refractory bricks with Aluminium lining, resistant to corrosive waste or gas and to thermal shock

Secondary

Combustion

Chamber Type: horizontal/vertical

Temperature: 1200-1400 oC

Residence time of gases : >2 seconds

Material

External- Low thermal mass insulation 14-30 oC

Internal lining: a fire proof material of pre-fired refractory bricks with Aluminium nettle lining, resistant to corrosive waste or gas and to thermal shock.

Ash Handling System Both Automatic and manual removal of Ash. Must ensure removal/treatment of hazardous remnants of ash.

Flue gas treatment system

Capable of treating the flow of flue gas as the incinerator is operating at its maximum capacity

Auxiliary device: Water level gauge, pressure sensor, PH sensor..etc.

Auxiliary device: Fuel cut off device

Waste feeding mechanism Automatic pneumatic/hydraulic waste loading system or conveyor belt , capacity 650-800L at a time

Chimney (Stack) Type: Vertical type

height: 7-10 meters

Material: Fireproof cast, stainless steel

Wet scrubbing system Vertical sprat tower with baffles or packing inside

Gas emission Reduction of Pollutant gas SO2, HCL, HF and line particulate

OUTPUT ASH -Max <5% of original waste size

GAS- SMOKELESS,ODORLESS

Emission standard WHO/ European

Test report for emission testing Must be provided

Product Data sheet/ Catalogue Must be attached to the ITB

Additional Requirement -Local agent or branch in Ethiopia

-Training for users as well as for EPHI maintenance staff on preventive maintenance

-Fuel tanker with a minimum capacity of 2500 litre (made of plastic material with overfill prevention valve ,fuel gauge, lifting eyes)

-The bidder should be willing to sign at least a five years’ service and maintenance agreement with the client (EPHI)

-The supplier shall arrange by itself lifting equipment and labour needed during the installation, testing and commissioning of the incinerator

waste

Containerized Mobile Incinerators

Jul 24, 2019 by hiclover 0 Comments #epost

○ Containerized Mobile Incinerator(CA Model)

HICLOVER now offer a full range of containerized incineration systems, placing us at the forefront of the latest transportation and industrial trends. Containerization enables immediate waste management as the units are pre-assembled and pre-installed.

Containerization is the most feasible and viable option in contrast to the construction of on-site facilities and housing structures, eliminating the man power and costs involved. The system has the added benefit of total mobility (both local and international), and is ideal for military and civil camps and remote locations where infrastructure is scarce.

※Main Feature:

— Double Combustion Chamber

— Double Italy Burner

–Burning Rate: 10-100kgs per hour

–Combustion Chamber: 0.1M3-1.2M3

— Mobile Incinerator, Standard shipping containers, Easy to move/transport system

— Free Installation, Pre-installed incinerator, Ideal for camps

— Ultraviolet lamp sterilization inside

※Optional Function/Parts/Material/Burning Rate:

— Stainless Steel Chimney

— Dry Smoke Filter Chamber

— Chimney Height Custom Made

— Upgrade/Downgrade Burning Rate

waste

Containerized Mobile Incinerator

Jul 24, 2019 by hiclover 0 Comments #epost

○ Containerized Mobile Incinerator(CA Model)

※Main Feature:

— Double Combustion Chamber

— Double Italy Burner

–Burning Rate: 10-100kgs per hour

–Combustion Chamber: 0.1M3-1.2M3

— Mobile Incinerator, Standard shipping containers, Easy to move/transport system

— Free Installation, Pre-installed incinerator, Ideal for camps

— Ultraviolet lamp sterilization inside

※Optional Function/Parts/Material/Burning Rate:

— Stainless Steel Chimney

— Dry Smoke Filter Chamber

— Chimney Height Custom Made

— Upgrade/Downgrade Burning Rate

waste

HICLOVER Waste Incinerator

Jul 24, 2019 by hiclover 0 Comments #epost

HICLOVER, Nanjing Clover Medical Technology Co.,Ltd, supply system solutions for medical environmental protection, animal and pet cremation engineering, other municipal solid waste incineration project.

We supply single combustion chamber, double combustion chambers, three combustion chambers and multi-combustion chambers waste incinerators for laboratory, clinic, hospital, medical center, hygiene clinical waste destruction with medical disposable, biological waste, medical plastic waste, hazardous waste, red bag waste, needle disposal, gauze and bandages, sealed sharp containers, pathological waste, trace-chemotherapeutic wastes, etc.

Our range of incinerators cater for small to large scale animal cremation related businesses, such as poultry farms, cattle farms, sheep farms, pig farms, stables, kennels, testing laboratory, catteries, pet crematoriums.

The incinerator burn waste in primary combustion chamber and burn the smoke from primary combustion chamber again to make sure environmentally friendly with no black smoke, smelless, reduce pathogenic bacteria infection.

Tag: epost

1) Policy

2) Waste Disposal Plan

The incinerator burn waste in primary combustion chamber and burn the smoke from primary combustion chamber again to make sure environmentally friendly with no black smoke, smelless, reduce pathogenic bacteria infection.