hiclover

Containerized Mobile Kind Tool Unit Waste Burner

Medium Unit – to handle an average waste production of 500 kg/day.Minimum load capacity: 600 kg.Maximum load capacity: 1,000 kg.Nominal burning rate: 55-80 kg/hr (= 440 C 640kg range per 8hour day).

Items/Model

TS50( PLC)

Image

Concept

Waste Incineration Therapy

Burn Price

Standard 50-100 kg/hour

Feed Capacity

Ordinary 200-300 kg/feeding

Control Mode

PLC( Programmable Logic Controller Incinerator)

Optional Upgrade Containerized Mobile Kind Incinerator

ISO 20′ ′ Complete Container

Burning Chamber

560L

Interior Measurements

1000x800x700mm

Second Chamber

280L

Smoke Filter Chamber

Yes

Feed Setting

Handbook

Voltage

210/240V 50Hz 1P

Power

1.3 Kw

Oil Consumption (kg/hour)

Ordinary 20.4( D.O)

Thermal ability( kw/hour)

166-332

Gas Consumption (m3/hour)

***

Temperature Level Monitor

Digital Display

Oil Tank

1000L

Feed Door

60x50cm

Chimney

10Meter

Chimney Kind

Stainless-steel

1st. Chamber Temperature Level

800 ℃–– -1000 ℃

2nd. Chamber Temperature

1000 ℃ -1200 ℃

Residency Time

2.0 Sec.

Gross Weight

7500kg

Outside Dimensions

260x160x250cm( without smokeshaft)


incineradores para la venta de china

Los incineradores utilizados se limitarán a las horas de funcionamiento diurnas. Esto incluye apagado, limpieza y mantenimiento.

Las corrientes de desechos no se mezclarán durante el proceso de incineración y la cámara de recolección de cenizas se limpiará cuando un

se incinerarán diferentes corrientes de desechos. La Compañía proporcionará al contratista una lista de elementos que pueden

incinerado.

Toda la ceniza se recolectará y almacenará en contenedores de almacenamiento individuales para cada corriente de desechos en particular. Los contenedores deben ser

proporcionados por el contratista con el mismo diseño que los contenedores de almacenamiento para los flujos de desechos crudos e incluyen un diseño de tapa

que previene la contaminación del agua.

Las cenizas de cada flujo de desechos se enviarán para análisis de laboratorio después de cada incineración inicial por parte de la Compañía y en

intervalos decididos por la Compañía a partir de entonces. El contratista deberá recolectar muestras de cenizas para su análisis como

dirigido por la Compañía. El Contratista será responsable de la seguridad de las muestras tomadas para evitar la contaminación.

hasta que lo recoja la Compañía o el mensajero designado.

La ceniza se eliminará bajo la dirección de la Compañía. Es responsabilidad del Contratista asegurar que las cenizas

no se compromete hasta su disposición final. La empresa proporcionará un área de almacenamiento adicional para las cenizas si es necesario.

Calendario de entregas

El plazo de entrega de la unidad con capacidad de 100 kg / h solicitada no es mayor a 10 semanas y 14 semanas para el

unidad con capacidad 150 kg / h. Estos cronogramas incluyen la movilización de unidades. Ubicación, Erbil, IRAK.

APÉNDICE A

RECOMENDACIONES PARA INCINERADORES DE RESIDUOS

  1. Tipo de cámara múltiple, cuerpo cilíndrico estacionario horizontal;
  1. Capacidad de 15 kilogramos por hora;
  1. Con motor diésel;
  1. Los quemadores deben ser de tipo monobloque con ventilador incorporado, motor, programador electrónico, automático

dispositivo de sensor de encendido, regulador de combustible, registro y seguridad para la ausencia de válvula solenoide de activación de llama

montado en el suministro de caballete;

  1. El sistema debe tener ventilación para barrer los gases anteriores antes de activar el suministro de combustible al

quemador;

Twin Chamber Incinerator



Basic Info.

Pullution Sources:Solid Waste Processing
Processing Methods:Combustion
Export Markets:Global

Additional Info.

Trademark:clover

Product Description

Nanjing Clover Medical Technology Co., Ltd., local in Nanjing city, China. CLOVER is manufacturer of medical product, waste incinerator and other environmental protection equipment. The market network across over the territory of China and more than 30 countries throughout the world. 
We, Nanjing Clover Medical Technology Co., Ltd., based at China mainland. We are manufacturer of environmental protection equipment and specialized in design, factories in china of biological waste incinerators, factory incinerator, factory waste burners 50 kg per hr, farm animal cremation equipment, manufacture and sell Waste Management System, including incinerator for Hospital, Veterinary Clinic, Laboratory, Farm, Community waste and Camp Waste, etc. Clover Medical supply incinerator, capacity from 10kgs per hour to 500kgs per hour. We also agent and sale burners, including Light Oil Burner, Heavy oil Burners, Gas Burner and Dual Fuel Burner Light Oil&Gas, etc.

Items/Model YD-10C YD-20C YD-30C YD-50C
Burning Rate (kgs/Hour) 10 kgs/Hr. 20 kgs/Hr. 30 kgs/Hr. 50 kgs/Hr.
Feed Capacity (kgs) 40 kgs 40 kgs 50 kgs 80 kgs
Equipment Weight 1200 kgs 1200 kgs 1800 kgs 2200 kgs
Primary Chamber (Liters) 200 200 250 400
Secondary Chamber (Liters) 140 140 140 140
External Dimensions (cm) 170x140x160 170x140x160 170x140x190 180x160x200
Internal Dimensions (cm) 55x55x65 55x55x65 55x55x85 70x70x85
Oil Tank(Liters) 50 100 100 150
Door Opening (cm) 38 x 48 38 x 48 38 x 48 45×55
Chimney (M) 5 5 5 5
Chimney Type Stainless Steel Stainless Steel Stainless Steel Stainless Steel
Secondary Chamber  YES YES YES YES
Mix-Combustion Chamber YES YES YES YES
Smoke Filter Chamber YES YES YES YES
Combustion Fuel Oil/Gas Oil/Gas Oil/Gas Oil/Gas
Residency Time 2.0 Sec. 2.0 Sec. 2.0 Sec. 2.0 Sec.
Temperature Monitoring YES YES YES YES

Установка для сжигания отходов с автоматическим контроллером ПЛК с двойными тепловыми горелками и двухкамерным HICLOVER YD-30C с мокрым скруббером

Пункт

Технические характеристики

Модель

YD -30С

Список основных продуктов

Первичная камера сгорания (основной корпус из нержавеющей стали)

Вторичная камера сгорания (основной корпус из нержавеющей стали)

Камера смешанного сгорания

Влажный скруббер ( Стирка Башня ) (Основной корпус из нержавеющей стали)

Контроллер инсинератора

Камин: 5 .0Meters

* (обновление до нержавеющей стали, бесплатно)

Италия газовая горелка: 02 комплекта

Масляный бак (для жидкого топлива): 1 0 0 литров

Мусоросжигательная установка с автоматическим контроллером ПЛК с двойными тепловыми горелками и двойной камерой.
Горючесть до
30 кг в час.
Циклонный воздухоочиститель с водяным душем
Лист из нержавеющей стали марки 304 для водоочистной камеры
Время до 250 мин.
Полностью автоматическая электрическая схема управления с таймерами
Первичная температура 800-1000 ° C
Вторичная температура1000-1200 ° C
Ручная загрузка / разгрузка
Автоматический запуск при сбое питания во время процесса
Автоматическое управление быстрым повышением температуры определяет быстро горящие материалы и снижает расход топлива горелки за счет автоматического выключения / включения горелки. Подходит для отходов больниц
Количество конфорок 2 шт.
Напряжение 380 В 50 Гц
Оперативное приказание 5 C
60 С Влажность 10 C 90%

Тип топлива Природный газ Количество камер 02 шт.

 


HICLOVER – Медицинское окружение  

Установки для сжигания отходов
Установка для сжигания медицинских отходов
Кремация домашних животных
Твердые отходы   Мусоросжигатель

Телефон: + 86-25-8461 0201
Мобильный: + 86-13813931455 (WhatsApp / WeChat)
Сайт: www.hiclover.com
Электронная почта: [электронная почта защищена]
Электронная почта: [электронная почта защищена]
Наньцзин Клевер Медицинские Технологии Лтд.

2020-06-28

incinerator producer 200kgs/h

Waste is thermally decayed in the main chamber at temperature levels of 800 ° C +. The resulting aeriform items are entirely oxidized in the second chamber at higher temperature levels with adequate resident time. Other specifications are as follows. A burning chamber of waste:

* Perfectly limited door for the manual loading of waste. The loading ought to be Manual, Set Load

* A burner of lights which the use is restricted to the ignition of waste.

* Frontage of loading with door seals risen on hinges, wheel of screw plug, flexible joint, as well as packing protecting out of refractory.

* The insulation of the burning chamber need to be made up of refractory bricks, having a high web content of aluminum and shields bricks in order to assure a minimum temperature on the outside sheet steel.

* Composition of the refractory

Burning Ability

Max. 200kgs/h

Supporting Gas

Diesel

Kind of Heater

Monoblock automatic heaters

Temperatures

Primary Chamber: 800 ° C ± 50 ° C. Additional Chamber: 1300 ° C ±

50 ° C. Kind. Static strong fireplace.

Product of Building and construction.

Mild Steel.

Refractory thickness.

115 mm thick.

Product.

Refractory blocks.

Insulation density.

50 mm thick.

Waste Charging.

Manual.

Ash Elimination.

Handbook.

Kind.

Static solid fireplace.

Material of Construction.

Mild Steel.

Refractory thickness.

115 mm thick.

Product.

Refractory blocks.

Insulation density.

50 mm thick.

Type.

Centrifugal.

Inflection.

Manual damper control.

Product of Construction.

Mild Steel.

Sort of temperature controller.

Digital.

End up & & paint kind.

Dual coat.

Material of construction & & capacity

. Mild Steel/ Plastic, appropriate capacity.

Other Standard Accessories.

Diesel oil degree sign, piping with shutoffs & & Non-return shutoff.

Aesthetic Monitoring of Gas.

Offered.

No. of Burners.

2 one in primary and also in second chamber).

Type & & Design

. Monoblock automated oil fired.

Make.

Riello.

Fuel.

Diesel.

Fuel shipment.

10 C 20 kg/h.

Discharging phase.

1.

Thermal power.

118 C 236 kW.

Motor power.

240 W.

Pump pressure.

10 C 12 bar (basic calibration), Max. pressure 15 bar.

Electrical supply.

Single phase 220V, 50Hz.

Material of building and construction.

Burned bricks.

Height.

9 meters from ground degree.

китайские производители мусоросжигательных заводов

В простой конструкции с металлическим стальным барабаном электрический. в том числе:
Клетка для приема биомедицинских отходов;
Камера сгорания с камином с фильтром для улавливания золы;
Прикрытие;
Подача воздуха;
Турбина, позволяющая подавать воздух.
Температура горения: 1800 ° С. Соответствие европейским стандартам.
Поставляется со всеми необходимыми аксессуарами
Поставка инсинератора модели ПДР-18 в составе:

· Производительность 100 кг / час отходов с влажностью до 85%

? Две камеры сгорания

· Две полностью автоматические жидкотопливные струйные горелки

· Пульт управления

· Дизельный бак емкостью 250 л. с 2-мя дизельными трубопроводами, фильтром и клапаном.
Тип: для отходов животноводства
Производительность: 30 кг в час при максимальной нагрузке 120 кг.
GLP газ
Напряжение: 110-120 В
Панель полуавтоматического управления
Дымоход из нержавеющей стали на высоте 3,5 метра над мусоросжигательной печью.
Высокотемпературная окраска всего мусоросжигательного завода.
Входная дверь для погрузки и разгрузки.
Топливо Дизельное топливо 8 / керосин
Объем (м3) 0,57
Производительность 50 кг в час
Среднее время выгорания 5 часов
Внешние размеры
Длина 2000мм
Ширина 1100мм
Высота с дымоходом 3500 мм
Открытие двери
Внутренние размеры
(первичная камера)
Длина 1200мм
Ширина 620мм
Высота 660 мм
Операция
Мин. рабочая температура 9500C
Максимум. рабочая температура 13200С
Время пребывания во второй камере 2,0 секунды.
Вес 1850кг
Вспомогательные
Руководства по эксплуатации и техническому обслуживанию
Рекомендуемый список запасных частей
300 литровый топливный бак
Скорость горения установки – 100 кг / час.

Топливо – Дизельное топливо – 35 сек Редвуд

Габаритные размеры следующие:

Ширина 2261мм

Длина 3264мм

Диаметр дымохода – 390 мм

Высота дымохода – 8000 мм
Китайские производители мусоросжигательных печей, Мы перерабатываем 8-10 тонн отходов туш овец и их побочных продуктов в день. Ищем оборудование: горелки внутреннего сгорания (комбинированная подача топлива: природный газ и дизельное топливо), панель управления и систему фильтров. Диаметр инсинератора 20 см. Низкая теплотворная способность отходов составляет 4 кВт / кг. Мощность нагрева 4000кВт

precio de combustión primaria incinerador médico

Equipado con una cámara de combustión principal y una segunda cámara para volver a quemar diseñada para asegurar una completa

combustión de los gases resultantes de la combustión incompleta de gases inertes en la chimenea, dentro de las normas

recomendado por la Organización Mundial de la Salud;

  1. Equipado con controlador de temperatura para ajustar el aire de la combustión de los residuos y el flujo de combustible en el

quemadores de la cámara de combustión y volver a encender para conservar energía cuando se alcanza el “estado de reposo” de la

proceso de combustión;

  1. El sistema de control también debe estar provisto de una alarma sonora en caso de disminución de temperatura. La

La característica de la energía local es trifásica 220 / 127V – 60Hz .;

  1. La circulación natural de los gases se inducirá en una chimenea de al menos 6 metros de altura y diámetro de

al menos 40 centímetros, de modo que la presión negativa sea suficiente para proteger al operador del exceso de incendios o

dispersión de gases nocivos;

  1. Se suministra con cuadro de control eléctrico con protección termomagnética y pulsadores de mando; y,
  1. Equipado con pirómetros medidores / controlador de temperatura de termopar con cromo-aluminio,

rango 0-1200 Deg C (para observar la temperatura de la primera y

250kgs per hr ability waste incinerator

Burner Model TS250 PLC, Review

This design is small-scale waste incineration tools for small waste outcome. Construction

is dual/double combustion chamber with 02 units oil burner, batch load incineration equipment. 
Waste feed chamber is 1800Liters (1.8m3, TS250 PLC). Primary & Secondary combustion chambers
and smoke filter chamber. Batch load on the bottom of chamber. Incinerator PLC panel control suit for local operation. 

Main Product List per 01 collection

Primary Burning Chamber

Additional Combustion Chamber

Smoke Filter Chamber

Incinerator PLC Control Instance

Smokeshaft:10.0 Meters

*( upgrade to Stainless-steel, complimentary expense)

Italy oil/gas heater: 02 units

Oil Tank (if oil fuel): 300Liters








Items/Model

TS200( PLC)

Picture

Principle

Strong Waste Incineration Therapy

Burn Rate

Average 250 kg/hour

Feed Capability

Standard 350kg/feeding

Control Setting

PLC( Programmable Logic Controller Burner)

Combustion Chamber

1800L

Internal Measurements

150x110x110cm

Second Chamber

750L

Smoke Filter Chamber

Yes

Feed Mode

Handbook

Voltage

220V

Power

0.9 Kw

Oil Intake (kg/hour)

Ordinary 28

Gas Usage (m3/hour)

Typical 33.6

Temperature Level Screen

Digital Present

Temperature Level Security

Yes

Oil Tank

300L

Feed Door

80x60cm

Smokeshaft

10Meter

Smokeshaft Kind

Stainless-steel

1st. Chamber Temperature

800 ℃–– -1000 ℃

2nd. Chamber Temperature Level

1000 ℃ -1200 ℃

Residency Time

2.0 Sec.

Gross Weight

8500kg

Exterior Dimensions

300x160x190cm

Heater procedure ought to be Automatic On/Off

Gas : diesel

The vendor must supply required information for the best of the installment

This incinerator with “PYROLYTIC” combustion have to have:

;

・ Refractory concrete:

§. Density: ≥ 100 mm

§. Nature: 42% of Al203

・ Shield in coarse panels:

§. Thickness: ≥ 75 mm

・ Nature: Calcium silicate.

* Burner of illumination of waste, with gas, common mono-bloc casting directing diving flame, lights and also safety of electronic ignition, irreversible air flow, electro-magnetic sluice entrance of regulation as well as isolating valve.

* Plate of burning in Carborundum, avoiding the dealing with of glass as well as slags.

A chamber of article burning of gases

* A heater of burning of gases,

* A device of shot of air enabling a complete recombustion of gases,

* A tool of air inlet of air conditioning of waste gases,

* A sheath of emptying of the gases charred.

* Carcass in solid sheet steel with support of link.

* Structure of the refractory;

・ Refractory concrete:

§ Thickness: ≥ 150 mm

§ Nature: 65% of Al203

・ Protect in coarse panel:

§ Thickness: ≥ 85 mm

Nature: Calcium



Pyrolytic Incinerator



Basic Info.

for Animal:All
Dosage Form:Incineration
Type:Cremation
Function:Cremation
Export Markets:Global

Additional Info.

Trademark:nanjing clover
Origin:Nanjing Clover

Product Description

Research and Markets: Waste: A Handbook for Management 

The breadth of information included in this single volume will make it the most comprehensive coverage of waste on the market. It focuses on all of the main areas including household waste (compostable material, paper, glass, textiles, household chemicals, plastic, water, e-waste), industrial and pet waste incinerator, pet. Crematory, pets cremation equipment, pets crematorium, pharmaceutical burning incinerator, pharmaceutical>waste label, pharmaceuticals waste, societal waste (metals, building, tires, medical battery, hazardous mining, nuclear, ocean, military, and space), and the future of landfills and incinerators. Including all the issues related to waste in one volume will help lead to comparisons, synergistic solutions, and a more informed society. In addition to a comprehensive coverage of waste, this book will offer the best ways of managing the problems through recycling, incineration, landfill and other processes.

Кремация животных большой емкости HICLOVER Модель A1500 с E-Power Auto. Дверь

Кремация животных большой емкости HICLOVER Модель A1500 с E-Power Auto. Дверь

Модель

A1500

Внутренние размеры

150 х 100 х 96 см

Костюм для животных

Кот – да

Собака – да

Свинья – маленькая

Корова маленький

Список основных продуктов

Первичная камера сгорания

Вторичная камера сгорания

Камера смешанного сгорания

Камера дымового фильтра

Контроллер инсинератора

Дымоход: 10.0 метров

* (обновление до нержавеющей стали, бесплатно)

Италия горелка на жидком топливе / газе: 03 комплекта

Масляный бак (для жидкого топлива): 500 литров

Дизайн для кремации домашних животных

Подвижная платформа и авто. Дверь и отверстие для проверки огня / пламени

Независимая позиция для маленького питомца





















HICLOVER – Медицинское окружение  

Установки для сжигания отходов
Установка для сжигания медицинских отходов
Кремация домашних животных
Твердые отходы   Мусоросжигатель

Телефон: + 86-25-8461 0201
Мобильный: + 86-13813931455 (WhatsApp / WeChat)
Сайт: www.hiclover.com
Электронная почта: [электронная почта защищена]
Электронная почта: [электронная почта защищена]
Наньцзин Клевер Медицинские Технологии Лтд.

2020-06-28