Archive: October 23, 2025

precio de combustión primaria incinerador médico

Equipado con una cámara de combustión principal y una segunda cámara para volver a quemar diseñada para asegurar una completa

combustión de los gases resultantes de la combustión incompleta de gases inertes en la chimenea, dentro de las normas

recomendado por la Organización Mundial de la Salud;

  1. Equipado con controlador de temperatura para ajustar el aire de la combustión de los residuos y el flujo de combustible en el

quemadores de la cámara de combustión y volver a encender para conservar energía cuando se alcanza el “estado de reposo” de la

proceso de combustión;

  1. El sistema de control también debe estar provisto de una alarma sonora en caso de disminución de temperatura. La

La característica de la energía local es trifásica 220 / 127V – 60Hz .;

  1. La circulación natural de los gases se inducirá en una chimenea de al menos 6 metros de altura y diámetro de

al menos 40 centímetros, de modo que la presión negativa sea suficiente para proteger al operador del exceso de incendios o

dispersión de gases nocivos;

  1. Se suministra con cuadro de control eléctrico con protección termomagnética y pulsadores de mando; y,
  1. Equipado con pirómetros medidores / controlador de temperatura de termopar con cromo-aluminio,

rango 0-1200 Deg C (para observar la temperatura de la primera y

250kgs per hr ability waste incinerator

Burner Model TS250 PLC, Review

This design is small-scale waste incineration tools for small waste outcome. Construction

is dual/double combustion chamber with 02 units oil burner, batch load incineration equipment. 
Waste feed chamber is 1800Liters (1.8m3, TS250 PLC). Primary & Secondary combustion chambers
and smoke filter chamber. Batch load on the bottom of chamber. Incinerator PLC panel control suit for local operation. 

Main Product List per 01 collection

Primary Burning Chamber

Additional Combustion Chamber

Smoke Filter Chamber

Incinerator PLC Control Instance

Smokeshaft:10.0 Meters

*( upgrade to Stainless-steel, complimentary expense)

Italy oil/gas heater: 02 units

Oil Tank (if oil fuel): 300Liters








Items/Model

TS200( PLC)

Picture

Principle

Strong Waste Incineration Therapy

Burn Rate

Average 250 kg/hour

Feed Capability

Standard 350kg/feeding

Control Setting

PLC( Programmable Logic Controller Burner)

Combustion Chamber

1800L

Internal Measurements

150x110x110cm

Second Chamber

750L

Smoke Filter Chamber

Yes

Feed Mode

Handbook

Voltage

220V

Power

0.9 Kw

Oil Intake (kg/hour)

Ordinary 28

Gas Usage (m3/hour)

Typical 33.6

Temperature Level Screen

Digital Present

Temperature Level Security

Yes

Oil Tank

300L

Feed Door

80x60cm

Smokeshaft

10Meter

Smokeshaft Kind

Stainless-steel

1st. Chamber Temperature

800 ℃–– -1000 ℃

2nd. Chamber Temperature Level

1000 ℃ -1200 ℃

Residency Time

2.0 Sec.

Gross Weight

8500kg

Exterior Dimensions

300x160x190cm

Heater procedure ought to be Automatic On/Off

Gas : diesel

The vendor must supply required information for the best of the installment

This incinerator with “PYROLYTIC” combustion have to have:

;

・ Refractory concrete:

§. Density: ≥ 100 mm

§. Nature: 42% of Al203

・ Shield in coarse panels:

§. Thickness: ≥ 75 mm

・ Nature: Calcium silicate.

* Burner of illumination of waste, with gas, common mono-bloc casting directing diving flame, lights and also safety of electronic ignition, irreversible air flow, electro-magnetic sluice entrance of regulation as well as isolating valve.

* Plate of burning in Carborundum, avoiding the dealing with of glass as well as slags.

A chamber of article burning of gases

* A heater of burning of gases,

* A device of shot of air enabling a complete recombustion of gases,

* A tool of air inlet of air conditioning of waste gases,

* A sheath of emptying of the gases charred.

* Carcass in solid sheet steel with support of link.

* Structure of the refractory;

・ Refractory concrete:

§ Thickness: ≥ 150 mm

§ Nature: 65% of Al203

・ Protect in coarse panel:

§ Thickness: ≥ 85 mm

Nature: Calcium



Pyrolytic Incinerator



Basic Info.

for Animal:All
Dosage Form:Incineration
Type:Cremation
Function:Cremation
Export Markets:Global

Additional Info.

Trademark:nanjing clover
Origin:Nanjing Clover

Product Description

Research and Markets: Waste: A Handbook for Management 

The breadth of information included in this single volume will make it the most comprehensive coverage of waste on the market. It focuses on all of the main areas including household waste (compostable material, paper, glass, textiles, household chemicals, plastic, water, e-waste), industrial and pet waste incinerator, pet. Crematory, pets cremation equipment, pets crematorium, pharmaceutical burning incinerator, pharmaceutical>waste label, pharmaceuticals waste, societal waste (metals, building, tires, medical battery, hazardous mining, nuclear, ocean, military, and space), and the future of landfills and incinerators. Including all the issues related to waste in one volume will help lead to comparisons, synergistic solutions, and a more informed society. In addition to a comprehensive coverage of waste, this book will offer the best ways of managing the problems through recycling, incineration, landfill and other processes.

Кремация животных большой емкости HICLOVER Модель A1500 с E-Power Auto. Дверь

Кремация животных большой емкости HICLOVER Модель A1500 с E-Power Auto. Дверь

Модель

A1500

Внутренние размеры

150 х 100 х 96 см

Костюм для животных

Кот – да

Собака – да

Свинья – маленькая

Корова маленький

Список основных продуктов

Первичная камера сгорания

Вторичная камера сгорания

Камера смешанного сгорания

Камера дымового фильтра

Контроллер инсинератора

Дымоход: 10.0 метров

* (обновление до нержавеющей стали, бесплатно)

Италия горелка на жидком топливе / газе: 03 комплекта

Масляный бак (для жидкого топлива): 500 литров

Дизайн для кремации домашних животных

Подвижная платформа и авто. Дверь и отверстие для проверки огня / пламени

Независимая позиция для маленького питомца





















HICLOVER – Медицинское окружение  

Установки для сжигания отходов
Установка для сжигания медицинских отходов
Кремация домашних животных
Твердые отходы   Мусоросжигатель

Телефон: + 86-25-8461 0201
Мобильный: + 86-13813931455 (WhatsApp / WeChat)
Сайт: www.hiclover.com
Электронная почта: [электронная почта защищена]
Электронная почта: [электронная почта защищена]
Наньцзин Клевер Медицинские Технологии Лтд.

2020-06-28

Waste Incineration Therapy Design TS75( PLC).

Average 50-100 kg/hour Burn Price

Items/Model

TS75( PLC)

Concept

Waste Incineration Therapy

Burn Price

Average 50-100 kg/hour

Feed Capacity

Ordinary 200-300 kg/feeding

Control Mode

PLC( Programmable Reasoning Controller Incinerator)

Face Oil Paint

800 ℃

Combustion Chamber

768 Liters (0.768 M3)

Internal Measurements

1200x800x800mm

Additional Chamber

384 Liters (0.384 M3)

Smoke Filter Chamber

Yes

Feed Setting

Handbook

Voltage

210/240V 50Hz 1P

Power

1.3 Kw

Oil Intake (kg/hour)

Typical 20.4( D.O)

Thermal capability( kw/hour)

166-332

Gas Intake (m3/hour)

***

Temperature Level Monitor

Digital Display

Oil Storage Tank

3000L

Feed Door

60x50cm

Smokeshaft

10Meter

Chimney Kind

Stainless Steel

1st. Chamber Temperature

800 ℃–– -1000 ℃

2nd. Chamber Temperature Level

1000 ℃ -1200 ℃

Residency Time

2.0 Sec.

Gross Weight

7500kg

Outside Measurements

260x160x250cm( without smokeshaft)

We provide solitary burning chamber, double combustion chambers, 3 burning chambers and multi-combustion

chambers waste incinerators for lab, center, medical facility, medical center, hygiene professional waste devastation with clinical

disposable, biological waste, medical plastic waste, hazardous waste, red bag waste, needle disposal, gauze and also plasters,

sealed sharp containers, pathological waste, trace-chemotherapeutic wastes, and so on.

Our series of incinerators provide for little to large scale pet cremation relevant companies, such as poultry farms, livestock

farms, lamb farms, pig ranches, stables, kennels, screening lab, catteries, pet crematoriums.

The incinerator burn waste in primary combustion chamber and burn the smoke from primary combustion chamber again to 

make sure environmentally friendly with no black smoke, smelless, reduce pathogenic bacteria infection.

System solutions for medical waste environmental, including waste incineration, smoke emission treatment, high-temperature 

sterilization, ultraviolet sterilization lamp, waste shredder, needle destroyer, medical waste package, sharp containers, etc.

The pet cremation equipment humanized design with movable platform, small space covers for modern pet cremation 

business owner all over the world.

The containerized mobile incinerator mounted in ISO container before leave factory, pre-installation, no incineration house 

build construction, movable by truck and ultraviolet lamp sterilization inside.

We are growing brand for environmental protection field, and market share with most of 

Africa, Middle East, Southeast Asia countries and part of North America, Europe territory. We are trusted partner for governmental 

organizations, non-profit organizations, international contractors, logistics organizations, military, pet cremation business owners, etc. 

We have export experience more than 40 countries, including war zone like Iraq, Afghanistan, Somalia, South Sudan.

We are china burner manufacturer, contractor and also exporter. Supplier clear up rate for incinerator customer,

supply clinical incinerator, medical facility burner, pet incinerators, hog burners, pet dog cremation devices, tiny incinerator,

pet incinerator, pet burner, mobile burner, small pet incinerator, infectious waste pyrolysis device, laboratory

burner.

precios de equipos de cremación de animales

Los siguientes requisitos deben considerarse como parte integral de las especificaciones técnicas de cada equipo.

tipo.

El sistema ofrecido estará diseñado para funcionar normalmente en las condiciones de las diferentes regiones de Kenia. Estas

Las condiciones pueden incluir, entre otras, el suministro de energía, la temperatura, la humedad y otras condiciones climáticas.

 Debe proporcionarse una garantía por un mínimo de 12 meses.

Todo el texto, parámetros, etc.en todas las interfaces de operación de control, así como en pantallas de información y en impresiones

deberá estar escrito en inglés. El Licitante es responsable de todos los permisos y aprobaciones para la importación. El Licitante deberá

proporcionar toda la documentación necesaria con el fin de facilitar los requisitos legales para la instalación y

funcionamiento del equipo.

 El período de ejecución es de 180 días a partir de la fecha del contrato que cubre la entrega en el sitio y la finalización de toda la verificación.

Operaciones necesarias para la emisión de la aceptación provisional.

Representantes de PATH y el Ministerio de Servicios Médicos (MOMS), junto con el Licitante o Licitador

representante, realizará los controles, ensayos y aprobación inicial para la aceptación provisional y final. La

La aceptación provisional y final tendrá lugar en los destinos finales.

Servicio posventa: el Licitante debe asegurarse de que un centro de mantenimiento, servicio y reparación,

autorizado por el fabricante, y que puede suministrar rápidamente repuestos originales y consumibles recomendados por

el fabricante está disponible durante todo el período de garantía. En cumplimiento de este requisito con su oferta,

Los licitadores deben presentar una declaración firmada por el fabricante o un

representante del fabricante:

proporcionando el nombre y la dirección de su centro autorizado de mantenimiento, servicio y reparación,

o Confirmando que este centro autorizado de mantenimiento, servicio y reparación puede suministrar rápidamente repuestos originales

y los consumibles recomendados por el fabricante.

El tiempo de entrega e instalación debe ser acordado entre el Licitante, el Hospital objetivo y PATH. La planta de tratamiento debe

llegan premontados. El Licitante se asegurará de que todas las partes de la planta transportadas por mar no se envíen como “

carga de cubierta.”

производители больничных инсинераторов

Мусоросжигательный завод является продуктом сжигания отходов различных нефтехимических предприятий. В этом проекте мы хотим сжигать все отходы нефтехимических установок, а также производить пар высокого давления из тепла, выделяемого на мусоросжигательной установке.
Сначала отходы нефтехимии собираются и передаются в транзитно-сортировочный центр в различных формах. Входные потоки установки для сжигания показаны в таблице ниже:

производители больничных инсинераторов, Отходы нефтехимических установок собирают и хранят в Центре транзита и сортировки.
В Центре транзита и сортировки необходимо учитывать одну лабораторию.
В этом центре отходы будут разделены на две группы:
– непригоден для сжигания
– Подходит для сжигания
Непригодные для сжигания отходы можно разделить на 4 категории:
– Погребенные материалы
– Материалы (отходы), которые необходимо стабилизировать перед захоронением
– Материалы (отходы), которые можно продать.
– Отходы, которые можно вернуть в нефтехимию.
Подходящие отходы делятся на две категории:
– Отходы, поступающие во вращающуюся печь, состоят из твердых частиц и жидких отходов.
– Отходы, поступающие в статическую печь, состоят из чистых жидкостей и газов.
Все твердые отходы должны быть перемещены в яму для хранения из Транзитно-сортировочного центра. Яма для хранения твердых отходов является входом во вращающуюся печь.
Все жидкие отходы должны храниться и стабилизироваться в Центре транзита и сортировки. Необходимо учитывать все устройства или приспособления для хранения и стабилизации. Устройства (сооружения) для хранения и стабилизации состоят из:
Резервуары, насосы (перекачка, загрузка и разгрузка), мешалка (смеситель), система заслонки, факельная система, контрольно-измерительные системы и т. Д.
Емкость хранения и стабилизации следует рассматривать на основе наихудшего случая (остановка).
Как правило, мусоросжигательный завод состоит из двух одинаковых линий (мощность каждой линии составляет 100%). Каждая линия состоит из вращающейся печи и статической печи.

50-100-150-200 Kgs per Hour Solid Waste Incinerator on Sale

Waste Incinerator Model TS150 PLC, Review

This version is small-scale waste incineration devices for little waste output.

Construction is dual/double combustion chamber with 02 sets oil burner, batch load 
incineration equipment. Waste feed chamber is 1570Liters (1.57m3, TS150 PLC). 
Primary & Secondary combustion chambers and smoke filter chamber. 
Batch load on the bottom of chamber. Incinerator PLC panel control suit for local operation.


Primary Combustion Chamber: 

※Main Feature:

— Double Combustion Chamber
— Double Italy Burner
— Smoke Filter included
–Burning Rate: 50-200kgs per hour optional
–Primary Combustion Chamber: 1.57M3(1570Liters)
— Incinerator Mainbody steel: 8mm thickness 
— Paint for outside face: 800°C Rate
Chamber Material: High Alumina Fire Brick Wall, 1750℃ Rate
— Idea for campsite average or below 600 people
— Chimney: 10 Meters, Stainless steel


Feeding door primary chamber:

Items/Model

TS150( PLC)

Image

Principle

Waste Incineration Treatment

Burn Rate

Average 150 kg/hour

*( 50/100/200kgs/ hr optional)

Feed Capacity

Average 750kg/feeding

Control Setting

PLC( Programmable Logic Controller Burner)

Text Steel

8mm thickness

Chamber Material

High Alumina Fire Block Wall, 1750 ℃ Price

Paint for outdoors face

800 ° C Price

Burning Chamber

1570L

Internal Dimensions

150x100x105cm

Second Chamber

750L

Smoke Filter Chamber

Yes

Feed Mode

Manual

Voltage

210/230V 50/60Hz

Power

0.9 Kw

Oil Intake (kg/hour)

Typical 20.4-28.0( D.O)

Gas Intake (m3/hour)

***

Temperature Screen

Digital Show

Temperature Level Security

Yes

Oil Container

300L

Feed Door

80x60cm

Chimney

10Meter

Smokeshaft Type

Stainless-steel

1st. Chamber Temperature Level

800 ℃–– -1000 ℃

second. Chamber Temperature Level

1000 ℃ -1200 ℃

Residency Time

2.0 Sec.

Gross Weight

8500kg

Exterior Dimensions

300x160x280cm( without smokeshaft)




 
Waste Incinerators
Medical Waste Incinerator
Pet Animal Cremation
Solid Waste Incinerator

Tel:  +86-25-8461 0201   
Mobile: +86-13813931455(whatsapp/wechat)
Website: www.hiclover.com  
Email: [email protected]
Email: [email protected]  
Nanjing Clover Medical Technology Co.,Ltd.

HICLOVER Малогабаритный мусоросжигательный завод с колесом и тормозом

Модель

Ярд-30 Мобильный Тип

Картина

 

Скорость горения

В среднем 30 кг / час

Емкость подачи

В среднем 60 кг / кормление

Основной корпус камеры

Нержавеющая сталь

Мобильная функция

С колесом и тормозом

Первичная камера сгорания

280 литров

Вторичная камера сгорания

150 литров

Камера сгорания смеси

да

Режим подачи

Руководство по эксплуатации

Напряжение

220В

Мощность

1,5 кВт

Тип топлива

Дизельное топливо

Горелка

Италия Оригинал

Расход масла (дизельное топливо)

В среднем 13,3 кг /час

Внутренние размеры

80 х 60 х 60см (первичная камера)

Внешние размеры

125 х 90 х 260см (без дымохода)

Монитор температуры

да

Емкость масляного бака (для жидкого топлива)

100 литров

Открытие двери

50 х 50см

Длина дымохода

2,0 метра

Тип дымохода

Нержавеющая сталь

Вес брутто оборудования

1600 кг

Технические характеристики эксплуатации

Температура первичной камеры

800 -1000

Температура вторичной камеры

1000 -1200

Время проживания

2.0 сек.

Эффективность горения

98%

Отходы с более низкой теплотворной способностью

3000 ккал


HICLOVER – Медицинское окружение  

Установки для сжигания отходов
Установка для сжигания медицинских отходов
Кремация домашних животных
Твердые отходы   Мусоросжигатель

Телефон: + 86-25-8461 0201
Мобильный: + 86-13813931455 (WhatsApp / WeChat)
Сайт: www.hiclover.com
Электронная почта: [электронная почта защищена]
Электронная почта: [электронная почта защищена]
Наньцзин Клевер Медицинские Технологии Лтд.

2020-06-28

Animal Waste Incinerator



Basic Info.

Model NO.:animal pet incinerator for sales
Export Markets:Global

Product Description

Nanjing Clover Medical Technology Co., Ltd. Is a leading waste incinerator manufacturer in China. We are local manufacturer and one of the largest exporter of China. Pyrolytic incinerator equipment technical is main waste treatment all of the world, for Medical Waste, Animal Incineration, Pet cremation and other Solid wste. The capacity from 10kgs/Hr. To 500kgs/Hr., up to 6ton per day. Calculating capacity for incinerator, calculation of capacity of incinerator, capacities medical waste incinerators, capacity 30 kgs, capacity 300kg hour, Presently, we supply different series for local customer requirements and design updated incinerator with our leading technology. The updated design feature of our range of incinerators make them one of the most cost effective in the world. 
Key Features: 
* All models with Dual combustion chamber. 
* Stainless Steel chimney/stack, long lifetime. *according to order 
* High temperature, long lifetime of incinerator. 
* Free or minimum installation on site. 
* High burn rate, from 10kgs to 500kgs per hour, up to 6ton per day. 
* PLC Control Plane. *according to order 
* New Design for pet animal cremation business. 
* One year warranty on incinerator and parts in stock.

Items/Model A1500 A2400 A4000 A5500
Burning Rate *animal 90 kgs/Hr. 150 kgs/Hr. 200 kgs/Hr. 400 kgs/Hr.
Feed Capacity *animal 120 kgs 200 kgs 300 kgs 500 kgs
Equipment Weight 7000 kgs 8300 kgs 13000 kgs 16500 kgs
Primary Chamber (Liters) 1500 2400 4000 5500
Secondary Chamber (Liters) 500 1200 1500 1500
External Dimensions (cm) 240x170x380 260x220x420 320x220x460 360 x 220 x 475
Internal Dimensions (cm) 150x100x96 220x110x100 257x147x108 300 x 147 x 125
Oil Tank(Liters) 500 500 500 500
Door Opening (cm) 59 x 81 90 x 110 108 x 128 108 x 128
Chimney (M) 10 10 14 14
Chimney Type Stainless Steel Stainless Steel Stainless Steel Stainless Steel
Secondary Chamber  YES YES YES YES
Mix-Combustion Chamber YES YES YES YES
Smoke Filter Chamber YES YES YES YES
Combustion Fuel Oil/Gas Oil/Gas Oil/Gas Oil/Gas
Residency Time 2.0 Sec. 2.0 Sec. 2.0 Sec. 2.0 Sec.
Temperature Monitoring YES YES YES YES