Archive: June 1, 2022

Items/Model	TS500( PLC)
Photo
Principle	Waste Incineration Therapy
Melt Rate	150-200 kg/hour
Control Setting	PLC( Programmable Reasoning Controller Heater)
Combustion Chamber	2700L
Inside Dimensions	190x120x120cm
Second Chamber	1300L
Smoke Filter Chamber	Yes
Feed Setting	Manual
Voltage	220V
Oil Intake (kg/hour)	Common 28
Gas Use (m3/hour)	***
Temperature Show	Digital Show
Temperature Level Safety And Security	Yes
Oil Tank	1400L
Feed Door	90x80cm
Chimney	10Meter
Smokeshaft Kind	Stainless Steel
1st.	Gross Weight
15000kg	Outdoors Dimensions
400x210x300cm( without chimney)
2020-03-21	400x210x300cm( without chimney)

The air supply should be controlled efficiently;

Flame contact with all the gases should be achieved;

The minimum combustion temperature of the primary chamber should not be less than 850°C;

The primary combustion chamber should be equipped with a means to provide supplemental liquid fuel supply.

The primary chamber should be cold face refractory lining, with a minimum thickness 100 mm.

The following conditions should be met in the secondary combustion chamber:

The air supply should be controlled efficiently;

Flame contact with all the gases should be achieved;

The size of the secondary chamber should be properly designed to ensure that the gas retention time should not be less than 2 seconds;

The secondary chamber should be cold face refractory lining, with a minimum thickness 100 mm;

The chamber should incorporate an integrated combustion burner air fans with automatically controlled distribution;

The gas temperature, as measured against the inside wall in the secondary chamber (not in the flame zone) should not be less than 1,100°C;

HICLOVER – Medical Environmental 

---

 

WWW.HICLOVER.COM

Waste Incinerators

Medical Waste Incinerator

Pet Animal Cremation

Solid Waste Incinerator

Tel:  +86-25-8461 0201   

Mobile: +86-13813931455(whatsapp/wechat)
Website: www.hiclover.com  
Email: [email protected]
Email: [email protected]  

Nanjing Clover Medical Technology Co.,Ltd.

 

2020-03-21