Where trash will end up is uncertain
After the Baltimore City Council passed clean-air legislation Monday that could force a large trash incineratorto shut down, officials in the city and …
Contractor for design, installation and commissioning of an incinerator
Contractor for design, installation and commissioning of an incinerator
|
Contractor for design, installation and commissioning of an incinerator
The appointment of a contractor for the design, installation and commissioning of an incinerator at the Pretoria National Zoological Garden. Minimum …
|
What’s Main Feature of Model A600 Pet Animal Incinerator
What’s Main Feature of Model A600 Pet Animal Incinerator
1, Primary and secondary and mix combustion chamber for pet animal and smoke burning.
2, smoke filter chamber for smoke filter
3, Stainless steel chimney
4, Italy original gas or oil burner, 2 sets total
5, Primary combustion chamber inner size is 130 x 70 x 65cm for most of pets animal.
6, Fire/Flame Checking Hole optional for check chamber inner when working.
7, Animal waste oil(body oil) collecting design.
8, Combustion chamber made with Refractory Concrete Cement, this design for Animal waste oil(body oil) problem.
9, small model A360 or bigger model A900 optional.
10, we can made as customer request
2, smoke filter chamber for smoke filter
3, Stainless steel chimney
4, Italy original gas or oil burner, 2 sets total
5, Primary combustion chamber inner size is 130 x 70 x 65cm for most of pets animal.
6, Fire/Flame Checking Hole optional for check chamber inner when working.
7, Animal waste oil(body oil) collecting design.
8, Combustion chamber made with Refractory Concrete Cement, this design for Animal waste oil(body oil) problem.
9, small model A360 or bigger model A900 optional.
10, we can made as customer request
About HICLOVER
About HICLOVER
HICLOVER, Nanjing Clover Medical Technology Co.,Ltd, supply system solutions for medical environmental protection, animal and pet cremation engineering, other municipal solid waste incineration project.
We supply single combustion chamber, double combustion chambers, three combustion chambers and multi-combustion chambers waste incinerators for laboratory, clinic, hospital, medical center, hygiene clinical waste destruction with medical disposable, biological waste, medical plastic waste, hazardous waste, red bag waste, needle disposal, gauze and bandages, sealed sharp containers, pathological waste, trace-chemotherapeutic wastes, etc.
Our range of incinerators cater for small to large scale animal cremation related businesses, such as poultry farms, cattle farms, sheep farms, pig farms, stables, kennels, testing laboratory, catteries, pet crematoriums.
The incinerator burn waste in primary combustion chamber and burn the smoke from primary combustion chamber again to make sure environmentally friendly with no black smoke, smelless, reduce pathogenic bacteria infection.
System solutions for medical waste environmental, including waste incineration, smoke emission treatment, high-temperature sterilization, ultraviolet sterilization lamp, waste shredder, needle destroyer, medical waste package, sharp containers, etc.
The pet cremation equipment humanized design with movable platform, small space covers for modern pet cremation business owner all over the world.
The containerized mobile incinerator mounted in ISO container before leave factory, pre-installation, no incineration house build construction, movable by truck and ultraviolet lamp sterilization inside.
HICLOVER is growing brand for environmental protection field, and market share with most of Africa, Middle East, Southeast Asia countries and part of North America, Europe territory. We are trusted partner for governmental organizations, non-profit organizations, international contractors, logistics organizations, military, pet cremation business owners, etc. We have export experience more than 40 countries, including war zone like Iraq, Afghanistan, Somalia, South Sudan.
We are china incinerator manufacturer, contractor and exporter. Manufacturer make reasonable price for incinerator customer, supply medical incinerator, hospital incinerator, animal incinerators, hog incinerators, pet cremation equipment, small incinerator, pet incinerator, animal incinerator, portable incinerator, small animal incinerator, infectious waste pyrolysis machine, laboratory incinerator. HICLOVER help customer reduce purchase budget, custom made function, quality products and friendly service.
Nanjing Clover Medical Technology Co., Ltd. is a leading waste incinerator manufacturer in China. All series included burning capacity 10kgs per hour, 30kgs per hour,50kgs per hour,100kgs per hour,150kgs per hour,300kgs per hour,500kgs per hour. Up to now, all models sale to all over the world and have good feedback from end-customer. The YD Model medical incinerator have multi-combustion chamber and basic dry scrubber (smoke filter chamber) with reasonable project budget. For the cleaner emission require, we accept custom made wet scrubber for incinerator and this will be also our next working by focusing on emission technical.
We supply single combustion chamber, double combustion chambers, three combustion chambers and multi-combustion chambers waste incinerators for laboratory, clinic, hospital, medical center, hygiene clinical waste destruction with medical disposable, biological waste, medical plastic waste, hazardous waste, red bag waste, needle disposal, gauze and bandages, sealed sharp containers, pathological waste, trace-chemotherapeutic wastes, etc.
Our range of incinerators cater for small to large scale animal cremation related businesses, such as poultry farms, cattle farms, sheep farms, pig farms, stables, kennels, testing laboratory, catteries, pet crematoriums.
The incinerator burn waste in primary combustion chamber and burn the smoke from primary combustion chamber again to make sure environmentally friendly with no black smoke, smelless, reduce pathogenic bacteria infection.
System solutions for medical waste environmental, including waste incineration, smoke emission treatment, high-temperature sterilization, ultraviolet sterilization lamp, waste shredder, needle destroyer, medical waste package, sharp containers, etc.
The pet cremation equipment humanized design with movable platform, small space covers for modern pet cremation business owner all over the world.
The containerized mobile incinerator mounted in ISO container before leave factory, pre-installation, no incineration house build construction, movable by truck and ultraviolet lamp sterilization inside.
HICLOVER is growing brand for environmental protection field, and market share with most of Africa, Middle East, Southeast Asia countries and part of North America, Europe territory. We are trusted partner for governmental organizations, non-profit organizations, international contractors, logistics organizations, military, pet cremation business owners, etc. We have export experience more than 40 countries, including war zone like Iraq, Afghanistan, Somalia, South Sudan.
We are china incinerator manufacturer, contractor and exporter. Manufacturer make reasonable price for incinerator customer, supply medical incinerator, hospital incinerator, animal incinerators, hog incinerators, pet cremation equipment, small incinerator, pet incinerator, animal incinerator, portable incinerator, small animal incinerator, infectious waste pyrolysis machine, laboratory incinerator. HICLOVER help customer reduce purchase budget, custom made function, quality products and friendly service.
Nanjing Clover Medical Technology Co., Ltd. is a leading waste incinerator manufacturer in China. All series included burning capacity 10kgs per hour, 30kgs per hour,50kgs per hour,100kgs per hour,150kgs per hour,300kgs per hour,500kgs per hour. Up to now, all models sale to all over the world and have good feedback from end-customer. The YD Model medical incinerator have multi-combustion chamber and basic dry scrubber (smoke filter chamber) with reasonable project budget. For the cleaner emission require, we accept custom made wet scrubber for incinerator and this will be also our next working by focusing on emission technical.
what’s Incinerator
what’s Incinerator
Incinerator,
incineration equipment to burn material you want to burn. most of time,
Incinerator for waste burning, including solid waste, liquid waste and gas
waste. the Incinerator fuel including oil, gas, coal, wood, etc. the fuel
function for start burn, keep waste burn or only keep burn itself to get high
temperature. Incinerator request 1/2/3/more Incinerator chamber, the
first chamber for waste and some time, there are 2 even if 3 first
chamber(first chamber union) for waste. the senondary chamber for the gas/smoke
from first chamber and the function for enviromental protection. the part is
necessary because we not only burn the waste, but also for the result we burn
the waste. for large capacity Incinerator, after the 1/2/3 combustion chambers,
there are some part for emission treatment, this are not burning parts, they
are only for smoke treatment. the function including Desulfurization, Deacidification,
Ash remove, Defogging, Heat recovery, Production hot water, Hot gas for waste
pre-dry, etc. at the end, the smoke will output in to environment.
incineration equipment to burn material you want to burn. most of time,
Incinerator for waste burning, including solid waste, liquid waste and gas
waste. the Incinerator fuel including oil, gas, coal, wood, etc. the fuel
function for start burn, keep waste burn or only keep burn itself to get high
temperature. Incinerator request 1/2/3/more Incinerator chamber, the
first chamber for waste and some time, there are 2 even if 3 first
chamber(first chamber union) for waste. the senondary chamber for the gas/smoke
from first chamber and the function for enviromental protection. the part is
necessary because we not only burn the waste, but also for the result we burn
the waste. for large capacity Incinerator, after the 1/2/3 combustion chambers,
there are some part for emission treatment, this are not burning parts, they
are only for smoke treatment. the function including Desulfurization, Deacidification,
Ash remove, Defogging, Heat recovery, Production hot water, Hot gas for waste
pre-dry, etc. at the end, the smoke will output in to environment.
Bidang aplikasi pengetahuan berkaitan penapis penggulungan automatik (roller filter)
Bidang aplikasi pengetahuan berkaitan penapis penggulungan automatik (roller filter)
16 Mei 2019 Berita Industri 214 tontonan
Ramai pelanggan tidak tahu apa itu penapis penggulungan automatik? Mengapa kita perlu menggunakan penapis luka? Apakah bidang aplikasi?
Penapis udara penggulungan automatik juga disebut penapis roller shutter, penapis roller. Kami sering menerima panggilan untuk bertanya mengenai prinsip operasi, menggunakan persekitaran dan kaedah pemasangan penapis penggulungan. Beberapa pelanggan tidak pernah menggunakan atau membeli penapis bergulung pada gambar institusi reka bentuk, dan mereka tidak tahu bagaimana memilih cara memasangnya dan debug. Oleh itu, kami akan memberi anda pengenalan sistematik kepada beberapa pengetahuan dan prinsip operasi penapis penggulungan automatik yang relevan, dengan harapan dapat memberi bantuan kepada bakal pengguna yang memerlukan penapis udara penggulungan automatik Ecolead!
Nanjing Clover Medical Technology Co.,Ltd.
Tel: +86-13813931455(WhatsApp)
Website: www.hiclover.com
Email: [email protected]
Email: [email protected]
Add: Gangjia Zhihui Industrial Area, Xin Gangwan Rd. Liuhe, Nanjing, China 211500
HICLOVER Solution for Fighting COVID-19, with ISO9001/CE Certification. Auto. Control Waste Incinerator & Auto. Roll Air Filter(Air Purification)
Penapis penggulungan automatik / penapis rol automatik automatik mempunyai aplikasi yang sangat luas. Pelanggan Ecolead dijual di pelbagai bidang perindustrian. Mereka secara kasar dibahagikan kepada dua jenis penapisan. Yang pertama adalah penapisan udara segar, yang menyaring zarah besar di Sistem udara segar. Bahan, untuk melindungi kualiti produk hiliran atau persekitaran, meningkatkan kualiti produk, dan meningkatkan kecekapan kerja, seperti penapisan udara segar di ruang blower kilang elektronik, kilang farmasi, loji rawatan kumbahan, penyaringan udara segar di unit penyaman udara, penyaringan udara masuk di loji janakuasa, turbin gas, dan yang memerlukan penyaringan utama Terowong, terowong, projek pertahanan udara awam, tempat letak kereta bawah tanah, dan lain-lain. Jenis kedua ialah penyaringan udara balik atau udara keluar. pencemaran di persekitaran jenis ini agak tinggi, dan ia perlu disaring dengan penapis penggulungan, penapisan karbon aktif, dan lain-lain. Zarah-zarah besar dalam gas, bahan toksik dan berbahaya, memenuhi piawaian pelepasan gas yang diluluskan oleh negara atau memasuki pengembalian sistem udara. Sebagai contoh, penyaringan udara mengembalikan penapisan udara di kilang tekstil, pemurnian sistem sintering dalam industri metalurgi, penyaringan gas dalam industri pelapisan, penyaringan pelepasan gas ekzos di kilang kimia, dll.
Pelanggan penapis penggulungan Syarikat Nanjing Yixiou menyatukan pengeluar penghawa dingin domestik dan asing, kilang elektronik, kilang farmasi, loji air, kilang kimia, pengeluar kenderaan dan unit pembinaan yang berkaitan, kontraktor kejuruteraan, pembekal kejuruteraan perlindungan alam sekitar dan banyak bidang lain. Semua jenis pelanggan
Talian hotline perundingan pemurnian Nanjing Yixiou: 025-57138032 Penghasilan utama penapis kecekapan primer, penapis kecekapan sederhana, penapis kecekapan tinggi, penapis penggulungan automatik, unit penapis kipas serba lengkap FFU, lampu pemurnian air mata, gudang penyucian, Pengatup rol, bangku bersih dan produk lain sangat sesuai untuk bilik bersih dari semua peringkat dari 1-10000. Selamat datang untuk menanyakan perbincangan harga dan teknikal.
Lebih banyak URL kandungan: www.ecolead.cn Tel: 025-57138032
-
Penapis udara tirai bergulir dan penapis utama jenis plat lebih baik, dan kelebihan dan kekurangan fungsi dianalisis dan dibedah
Kutipan bilik pancuran udara, penerapan penapis penutup udara segar dalam produksi sebenarnya, bilik mandi udara keluli tahan karat, ruang bersih pemurnian, penapis udara segar jenis reel, peralatan elektrik, 1 bilik mandi udara berganda ganda, pemasangan keluli warna pembersih bilik bersih, udara pengeluar bilik mandi, penapis jarum suntik, penapis dekarburisasi, jenis beg,
-
Analisis dan pilihan kos pelaburan dan operasi penapis udara bergelung dan penapis utama jenis plat yang lebih baik
Penapis pintu ikan keli curling, awning bersih, penapis penggulungan automatik standard, penggunaan penapis penutup udara segar dalam pengeluaran sebenar, pengeluar rana automatik automatik, bilik mandi udara bengkel pemurnian, rto, bilik penapis, rol jenis penutup rol, peralatan elektrik, penapis penggulungan elektrik , membersihkan bilik dan projek pembersihan,
-
Pengenalan struktur bangsal bersih
Bilik pancuran udara penyucian, 1 bilik pancuran udara berganda, penapis penggulungan jenis lurus, pengawal ffu gudang bersih, gudang kerja bersih, penapis rol Tianjin, gudang bersih, penapis rana rol
-
Analisis aplikasi penapis udara bergelung dalam industri rawatan air
Penapis kipas, pengeluar tirai bergulir automatik, penapis tirai gulung Nanjing, penapis udara segar bergulir, penapis bergulir, harga penapis udara tirai bergulir, penapis udara bergulir, penapis tirai bergulir yang berlaku, harga penapis rol automatik, ruang bersih bilik bersih
-
Peranan gudang bersih
Kilang pintu shutter roller cepat, kapas penapis roller shutter filter, bengkel bebas debu bersih, penapis primer jenis penggulungan, penggunaan, bilik mandi udara yang baik Jiangsu, penapis roller automatik, harga penapis rol automatik automatik, pelari Penukar haba penuh dengan diri- penapis penggulungan,
-
Langkah berjaga-jaga untuk menyahpepijat penapis udara bergulir automatik
Pengilang penapis udara berliku, gudang bersih Nanjing, bilik mandi udara, jenis tirai bergulir automatik
-
Pengenalan ringkas kepada pengeluar profesional bilik mandi udara Nanjing Yixiou
Pengilang penapis udara berliku, gudang bersih Nanjing, bilik mandi udara, jenis tirai bergulir automatik
-
Konsep dan standard kebersihan bilik yang relevan
Pengilang penapis udara berliku, gudang bersih Nanjing, bilik mandi udara, jenis tirai bergulir automatik
-
Pengenalan kepada struktur produk penapis rol automatik
Pengilang penapis udara berliku, gudang bersih Nanjing, bilik mandi udara, jenis tirai bergulir automatik
-
Penapis udara bergelung menggunakan bahan penapis bergelung khas
Pengilang penapis udara berliku, gudang bersih Nanjing, bilik mandi udara, jenis tirai bergulir automatik
-
Apakah penapis penggulungan automatik menegak?
Pengilang penapis udara berliku, gudang bersih Nanjing, bilik mandi udara, jenis tirai bergulir automatik
-
Mengapa kita perlu menggunakan penapis luka?
Pengilang penapis udara berliku, gudang bersih Nanjing, bilik mandi udara, jenis tirai bergulir automatik
-
Bagaimana memilih antara gudang bersih dan bengkel bebas debu?
Pengilang penapis udara berliku, gudang bersih Nanjing, bilik mandi udara, jenis tirai bergulir automatik
-
Analisis salah satu sebab jurang harga di pasar bilik mandi udara: analisis bahan dan proses rawatan permukaan bilik mandi udara
Pengilang penapis udara berliku, gudang bersih Nanjing, bilik mandi udara, jenis tirai bergulir automatik
-
Berapa lama masa yang diperlukan untuk menukar bahan penapis penapis penggulungan automatik?
Pengilang penapis udara berliku, gudang bersih Nanjing, bilik mandi udara, jenis tirai bergulir automatik
-
Perbezaan antara penapis roller shutter automatik mendatar dan menegak
Pengilang penapis udara berliku, gudang bersih Nanjing, bilik mandi udara, jenis tirai bergulir automatik
-
Bagaimana memasang penapis bergolek automatik? -Nanjing Ecolead
Pengilang penapis udara berliku, gudang bersih Nanjing, bilik mandi udara, jenis tirai bergulir automatik
-
Akhirnya memahami kecekapan penapisan: ringkasan kaedah penyataan kecekapan penapisan penapis udara
Pengilang penapis udara berliku, gudang bersih Nanjing, bilik mandi udara, jenis tirai bergulir automatik
-
Analisis perbandingan kelebihan dan kekurangan pemurnian udara “jenis sederhana” atau “jenis elektrostatik”
Pengilang penapis udara berliku, gudang bersih Nanjing, bilik mandi udara, jenis tirai bergulir automatik
-
Mengapa memilih penapis penggulungan automatik dan bukannya penapis plat dan bingkai biasa?
Pengilang penapis udara berliku, gudang bersih Nanjing, bilik mandi udara, jenis tirai bergulir automatik
-
Spesifikasi teknis untuk penawaran penapis udara tirai bergulir untuk masuk udara ruang penghisap ruang blower kilang rawatan kumbahan
Pengilang penapis udara berliku, gudang bersih Nanjing, bilik mandi udara, jenis tirai bergulir automatik
-
Analisis mendalam mengenai langkah penambahbaikan untuk penggunaan awam pembersih FFU
Pengilang penapis udara berliku, gudang bersih Nanjing, bilik mandi udara, jenis tirai bergulir automatik
-
Parameter teknikal terperinci penapis udara langsir automatik Nanjing Yi Xiou Ecolead
Pengilang penapis udara berliku, gudang bersih Nanjing, bilik mandi udara, jenis tirai bergulir automatik
-
Piawaian ujian penapis udara baru ISO 16890 akan menggantikan EN779: kecekapan penapisan ditentukan oleh klasifikasi bahan zarah
Pengilang penapis udara berliku, gudang bersih Nanjing, bilik mandi udara, jenis tirai bergulir automatik
Clinical Waste ncinerators for Health center 10-500kgs per hr
Clinical Waste ncinerators for Health center 10-500kgs per hr
Nanjing Clover Medical Technology Co.,Ltd.
Tel: +86-13813931455(WhatsApp)
Website: www.hiclover.com
Email: [email protected]
Email: [email protected]
Add: Gangjia Zhihui Industrial Area, Xin Gangwan Rd. Liuhe, Nanjing, China 211500
HICLOVER Solution for Fighting COVID-19, with ISO9001/CE Certification. Auto. Control Waste Incinerator & Auto. Roll Air Filter(Air Purification)| Items/Model | TS10(PLC) | TS20(PLC) | TS30(PLC) | TS50(PLC) | TS100(PLC) |
| Burn Rate (Average) | 10 kg/hour | 20 kg/hour | 30 kg/hour | 50 kg/hour | 100 kg/hour |
| Feed Capacity(Average) | 20kg | 40kg | 60kg | 100kg | 200 kg |
| Control Mode | PLC | PLC | PLC | PLC | PLC |
| Combustion Chamber | 100L | 210L | 330L | 560L | 1200L |
| Internal Dimensions | 50x50x40cm | 65x65x50cm | 75x75x60cm | 100x80x70cm | 120x100x100cm |
| Secondary Chamber | 50L | 110L | 180L | 280L | 600L |
| Smoke Filter Chamber | Yes | Yes | Yes | Yes | Yes |
| Feed Mode | Manual | Manual | Manual | Manual | Manual |
| Voltage | 220V | 220V | 220V | 220V | 220V |
| Power | 0.5Kw | 0.5Kw | 0.5Kw | 0.7Kw | 0.7Kw |
| Oil Consumption (kg/hour) | 5.4–12.6 | 7.8–16.3 | 10.2–20 | 12.1–24 | 14–28 |
| Gas Consumption (m3/hour) | 6.2–11.4 | 8–15.7 | 9.8–20 | 9.9–26.1 | 10–32.2 |
| Temperature Monitor | Yes | Yes | Yes | Yes | Yes |
| Temperature Protection | Yes | Yes | Yes | Yes | Yes |
| Oil Tank | 100L | 100L | 100L | 100L | 200L |
| Feed Door | 30x30cm | 45x40cm | 55x50cm | 70x55cm | 80x60cm |
| Chimney | 3Meter | 3Meter | 5Meter | 5Meter | 10Meter |
| Chimney Type | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel |
| 1st. Chamber Temperature | 800℃–1000℃ | 800℃–1000℃ | 800℃–1000℃ | 800℃–1000℃ | 800℃–1000℃ |
| 2nd. Chamber Temperature | 1000℃-1200℃ | 1000℃-1200℃ | 1000℃-1200℃ | 1000℃-1200℃ | 1000℃-1200℃ |
| Residency Time | 2.0 Sec. | 2.0 Sec. | 2.0 Sec. | 2.0 Sec. | 2.0 Sec. |
| Gross Weight | 1500kg | 2200kg | 3000kg | 4500kg | 6000kg |
| External Dimensions | 140x90x120cm | 160x110x130cm | 175x120x140cm | 230x130x155cm | 260x150x180cm |
| Items/Model | YD-30 | YD-50 | YD-100 | YD-150 | ||||
| Burning Rate (kgs/Hour) | 30 kgs/Hr. | 50 kgs/Hr. | 100 kgs/Hr. | 150 kgs/Hr. | ||||
| Feed Capacity (kgs) | 60 kgs | 150 kgs | 200 kgs | 300 kgs | ||||
| Equipment Weight | 2300 kgs | 4000 kgs | 5300 kgs | 7000 kgs | ||||
| Picture | 
|
|||||||
| Primary Chamber (Liters) | 360 | 900 | 1200 | 1500 | ||||
| Secondary Chamber (Liters) | 200 | 200 | 500 | 500 | ||||
| External Dimensions (cm) | 145x90x175 | 200x160x230 | 220x180x360 | 240x170x380 | ||||
| Internal Dimensions (cm) | 100x60x60 | 120x90x85 | 130x100x90 | 150x100x96 | ||||
| Oil Tank(Liters) | 200 | 300 | 300 | 300 | ||||
| Door Opening (cm) | 48 x 60 | 62 x 80 | 55 x 80 | 59 x 81 | ||||
| Chimney (M) | 5 | 5 | 10 | 10 | ||||
| Chimney Type | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | ||||
| Secondary Chamber | YES | YES | YES | YES | ||||
| Mix-Combustion Chamber | YES | YES | YES | YES | ||||
| Smoke Filter Chamber | YES | YES | YES | YES | ||||
| Combustion Fuel | Oil/Gas | Oil/Gas | Oil/Gas | Oil/Gas | ||||
| Residency Time | 2.0 Sec. | 2.0 Sec. | 2.0 Sec. | 2.0 Sec. | ||||
| Temperature Monitoring | YES | YES | YES | YES | ||||
| 1st. Chmaber Temperature | 800℃–1000℃ | 800℃–1000℃ | 800℃–1000℃ | 800℃–1000℃ | ||||
| 2nd. Chmaber Temperature | 1000℃-1200℃ | 1000℃-1200℃ | 1000℃-1200℃ | 1000℃-1200℃ | ||||
HICLOVER – Medical Environmental
| Items/Model | YD-200 | YD-300 | YD-500 | YD-600 | ||||
| Burning Rate (kgs/Hour) | 200 kgs/Hr. | 300 kgs/Hr. | 500 kgs/Hr. | 600 kgs/Hr. | ||||
| Feed Capacity (kgs) | 400 kgs | 500 kgs | 800 kgs | 1100 kgs | ||||
| Equipment Weight | 7600 kgs | 8300 kgs | 13000 kgs | 16500 kgs | ||||
| Picture |
|
|||||||
| Primary Chamber (Liters) | 2000 | 2400 | 4000 | 5500 | ||||
| Secondary Chamber (Liters) | 500 | 1200 | 1500 | 1500 | ||||
| External Dimensions (cm) | 270 x 185 x 380 | 260x220x420 | 320x220x460 | 360 x 220 x 475 | ||||
| Internal Dimensions (cm) | 180 x 115 x 96 | 220x110x100 | 257x147x108 | 300 x 147 x 125 | ||||
| Oil Tank(Liters) | 300 | 500 | 500 | 500 | ||||
| Door Opening (cm) | 59 x 81 | 90 x 110 | 108 x 128 | 108 x 128 | ||||
| Chimney (M) | 10 | 10 | 14 | 14 | ||||
| Chimney Type | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | ||||
| Secondary Chamber | YES | YES | YES | YES | ||||
| Mix-Combustion Chamber | YES | YES | YES | YES | ||||
| Smoke Filter Chamber | YES | YES | YES | YES | ||||
| Combustion Fuel | Oil/Gas | Oil/Gas | Oil/Gas | Oil/Gas | ||||
| Residency Time | 2.0 Sec. | 2.0 Sec. | 2.0 Sec. | 2.0 Sec. | ||||
| Temperature Monitoring | YES | YES | YES | YES | ||||
| 1st. Chmaber Temperature | 800℃–1000℃ | 800℃–1000℃ | 800℃–1000℃ | 800℃–1000℃ | ||||
| 2nd. Chmaber Temperature | 1000℃-1200℃ | 1000℃-1200℃ | 1000℃-1200℃ | 1000℃-1200℃ | ||||
Nanjing Clover Medical Technology Co.,Ltd.
Tel: +86-13813931455(WhatsApp)
Website: www.hiclover.com
Email: [email protected]
Email: [email protected]
Add: Gangjia Zhihui Industrial Area, Xin Gangwan Rd. Liuhe, Nanjing, China 211500
HICLOVER Solution for Fighting COVID-19, with ISO9001/CE Certification. Auto. Control Waste Incinerator & Auto. Roll Air Filter(Air Purification)Waste Incinerators
Medical Waste Incinerator
Pet Animal Cremation
Solid Waste Incinerator
Tel: +86-25-8461 0201
Mobile: +86-13813931455(whatsapp/wechat)
Website: www.hiclover.com
Email: [email protected]
Email: [email protected]
Website: www.hiclover.com
Email: [email protected]
Email: [email protected]
Nanjing Clover Medical Technology Co.,Ltd.
2020-04-08
Incinérateurs de déchets médicaux
Incinérateurs de déchets médicaux
Informations de base.
Description du produit
Réponse technologique (FAQ)
Q: Quel type de déchet peut-on utiliser dans cet équipement?
R: Cet équipement pour les déchets médicaux, les animaux de compagnie, les déchets municipaux, les déchets vivants. Interdire toute matière explosive et radiante, déchets liquides et gazeux.
Q: Norme de fumée d’incinérateur
R: Norme du gouvernement chinois: n ° GB18484-2001.
Nanjing Clover Medical Technology Co.,Ltd.
Tel: +86-13813931455(WhatsApp)
Website: www.hiclover.com
Email: [email protected]
Email: [email protected]
Add: Gangjia Zhihui Industrial Area, Xin Gangwan Rd. Liuhe, Nanjing, China 211500
HICLOVER Solution for Fighting COVID-19, with ISO9001/CE Certification. Auto. Control Waste Incinerator & Auto. Roll Air Filter(Air Purification)
Q: capacité de traitement
A: Capacité moyenne calculée par les déchets médicaux (puissance calorifique inférieure (LC P): 3,0TH Kcal / Kg par heure), ne signifie aucun déchet. Le taux de combustion animal / animal domestique est d’environ 2/3 de la capacité moyenne.
Durée d’utilisation de l’incinérateur de trèfle par jour jusqu’à 24 heures. Entre chaque temps d’alimentation / combustion, il y a environ 0,5 à 1 heure de temps de refroidissement et de temps pour alimenter les déchets. Fabricant de porcelaine d’incinérateur de laboratoire, incinérateurs de gros animaux, incinérateur de déchets médicaux à faible coût, crématoire pour animaux de compagnie, incinérateur pour animaux de compagnie, incinérateurs pour animaux de compagnie, le temps de combustion réel par jour est d’environ 16 heures. La durée de vie de l’incinérateur entre 5 et 10 ans selon l’utilisation.
En général, nous proposons un petit laboratoire, une petite capacité d’utilisation de la clinique inférieure à 20 kg par heure. Lors de l’utilisation de l’incinérateur à l’hôpital, veuillez calculer la capacité de sortie des déchets d’environ 2 kg par personne et par jour. S’il y a 200 lits de malade à l’hôpital, cela signifie que vous avez besoin d’une capacité d’incinération d’environ 400 kg par jour, le changement de capacité par heure est d’environ 30 à 40 kg par heure. Selon le temps de fonctionnement par jour, les déchets, le budget, le développement, etc., vous pouvez utiliser une capacité de 30 à 50 kg par heure d’incinérateur.
* Comment calculer le taux de brûlure de crémation animale: 2/3 des déchets médicaux.
Q: Assemblage et test
R: Nous fournissons tous les documents et incinérateurs faciles à installer et à utiliser. Le client peut envoyer des personnes à notre usine pour apprendre l’installation et le fonctionnement. En règle générale, nous n’envoyons pas d’ingénieur sur le site local si ce n’est pas la demande. Les frais d’envoi sont en sus selon la commande.
Q: température de combustion
R: La première chambre de combustion: 800-1000 degrés centi.
La deuxième chambre de combustion: 1000-1200 degrés centi.
Nanjing Clover Medical Technology Co.,Ltd.
Tel: +86-13813931455(WhatsApp)
Website: www.hiclover.com
Email: [email protected]
Email: [email protected]
Add: Gangjia Zhihui Industrial Area, Xin Gangwan Rd. Liuhe, Nanjing, China 211500
HICLOVER Solution for Fighting COVID-19, with ISO9001/CE Certification. Auto. Control Waste Incinerator & Auto. Roll Air Filter(Air Purification)
Q: Mode de contrôle de l’incinérateur
R: Le mode de contrôle par défaut est un cas de contrôle commun. Mode PLC selon modèle et ordre.
Q: Coûts d’exploitation et de maintenance
A: Coût de fonctionnement en fonction du taux de consommation de carburant et de la puissance / du personnel, etc.
Entretien annuel d’environ 500 $ à 1000 $ US par an selon le modèle, la situation d’utilisation.
Une personne peut entretenir 02 incinérateurs. Le personnel doit avoir des connaissances d’électricien de base pour faire fonctionner / inspecter / entretenir l’incinérateur / brûleur / ventilateur selon le guide de l’utilisateur et connaître le risque de déchets médicaux pour protéger le travailleur avec l’élément de protection nécessaire.
Q: Le temps de résidence dans la chambre de combustion secondaire
R: 02 sec.
| Articles / modèle | TS10 (API) | TS20 (API) | TS30 (API) | TS50 (API) | TS100 (API) |
| Taux de brûlure | 10 kg / heure | 20 kg / heure | 30 kg / heure | 50 kg / heure | 100 kg / heure |
| Capacité d’alimentation | 20 kg | 40 kg | 60 kg | 100 kg | 200 kilogrammes |
| Mode de contrôle | PLC | PLC | PLC | PLC | PLC |
| Chambre de combustion | 100 L | 210 L | 330 L | 560 L | 1200 L |
| Dimensions internes | 50x50x40cm | 65x65x50cm | 75x75x60cm | 100x80x70cm | 120x100x100 cm |
| Chambre secondaire | 50 L | 110 L | 180 L | 280 L | 600 L |
| Chambre de filtre à fumée | Oui | Oui | Oui | Oui | Oui |
| Mode d’alimentation | Manuel | Manuel | Manuel | Manuel | Manuel |
| Tension | 220V | 220V | 220V | 220V | 220V |
| Pouvoir | 0,5 Kw | 0,5 Kw | 0,5 Kw | 0,7 kW | 0,7 kW |
| Consommation d’huile (kg / heure) | 5,4–12,6 | 7,8–16,3 | 10,2–20 | 12,1–24 | 14-28 |
| Consommation de gaz (m3 / heure) | 6,2–11,4 | 8–15,7 | 9,8–20 | 9,9–26,1 | 10–32,2 |
| Moniteur de température | Oui | Oui | Oui | Oui | Oui |
| Protection de la température | Oui | Oui | Oui | Oui | Oui |
| Cuve à mazout | 100 L | 100 L | 100 L | 100 L | 200 L |
| Porte d’alimentation | 30x30cm | 45 x 40 cm | 55 x 50 cm | 70 x 55 cm | 80x60cm |
| Cheminée | 3 mètres | 3 mètres | 5 mètres | 5 mètres | 10 mètres |
| Type de cheminée | Acier inoxydable | Acier inoxydable | Acier inoxydable | Acier inoxydable | Acier inoxydable |
| Temps de résidence | 2,0 sec. | 2,0 sec. | 2,0 sec. | 2,0 sec. | 2,0 sec. |
| Poids brut | 1 500 kg | 2200 kg | 3000 kg | 4500 kg | 6000 kg |
| Dimensions extérieures | 140x90x120cm | 160x110x130cm | 175x120x140cm | 230x130x155cm | 260x150x180cm |
Horizontal Good Rubbish Incinerator
Horizontal Good Rubbish Incinerator
Basic Info.
Additional Info.
Product Description
Key Attributes: * All versions with Dual combustion chamber. *according to order Stainless Steel chimney/stack, long lifetime. *according to order * High fever, long lifetime of incinerator. * Free or minimal installation onsite. * High burn rate, from 10kgs to 500kgs per hourto 6ton daily. *according to order New Design for pet animal cremation enterprise. * One year guarantee on incinerator and parts in stock.
The mill workshop local in liuhe Economic Development Zone, suburb of Nanjing and company office local in downtown area. Presently, incinerator line products market cover former Soviet Union area, Africa countries, Asia countries and middle east area. From year 2010, we negotiated with updated technology from Europe and America producers and establish cooperation relationship in the territory of China market. Presentlywe investment more attempt, funds and technology advancement in our brand, we’re to be one of the most significant incineration equipment on earth. We have trading division company for expert export company support.
| Items/Model | YD-10C | YD-20C | YD-30C | YD-50C |
| Burning Rate (kgs/Hour) | 10 kgs/Hr. | 20 kgs/Hr. | 30 kgs/Hr. | 50 kgs/Hr. |
| Feed Capacity (kgs) | 40 kgs | 40 kgs | 50 kgs | 80 kgs |
| Equipment Weight | 1200 kgs | 1200 kgs | 1800 kgs | 2200 kgs |
| Primary Chamber (Liters) | 200 | 200 | 250 | 400 |
| Secondary Chamber (Liters) | 140 | 140 | 140 | 140 |
| External Dimensions (cm) | 170x140x160 | 170x140x160 | 170x140x190 | 180x160x200 |
| Internal Dimensions (cm) | 55x55x65 | 55x55x65 | 55x55x85 | 70x70x85 |
| Oil Tank(Liters) | 50 | 100 | 100 | 150 |
| Door Opening (cm) | 38 x 48 | 38 x 48 | 38 x 48 | 45×55 |
| Chimney (M) | 5 | 5 | 5 | 5 |
| Chimney Type | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel |
| Secondary Chamber | YES | YES | YES | YES |
| Mix-Combustion Chamber | YES | YES | YES | YES |
| Smoke Filter Chamber | YES | YES | YES | YES |
| Combustion Fuel | Oil/Gas | Oil/Gas | Oil/Gas | Oil/Gas |
| Residency Time | 2.0 Sec. | 2.0 Sec. | 2.0 Sec. | 2.0 Sec. |
| Temperature Monitoring | YES | YES | YES | YES |
Дизель-сжигатель, работающий 150 кг / час
Дизель-сжигатель, работающий 150 кг / час
ИНСИНЕРАТОР, ДИЗЕЛЬНЫЙ.
МОЩНОСТЬ: Горелка 150 кг / час.
Количество: Два [2] с полным комплектом принадлежностей.
Nanjing Clover Medical Technology Co.,Ltd.
Tel: +86-13813931455(WhatsApp)
Website: www.hiclover.com
Email: [email protected]
Email: [email protected]
Add: Gangjia Zhihui Industrial Area, Xin Gangwan Rd. Liuhe, Nanjing, China 211500
HICLOVER Solution for Fighting COVID-19, with ISO9001/CE Certification. Auto. Control Waste Incinerator & Auto. Roll Air Filter(Air Purification)
Типы используемых отходов: ОБЩИЕ ОТХОДЫ
Машины будут сертифицированы для работы от PME после прохождения обследования на месте.
Мы заботимся о следующих технических деталях:
– Производительность (мощность сжигания отходов в час). 150 кг / час.
– Строительные материалы, 5 мм Конструкция из высококачественной мягкой стали; Высококачественная огнеупорная футеровка 100 мм.
Nanjing Clover Medical Technology Co.,Ltd.
Tel: +86-13813931455(WhatsApp)
Website: www.hiclover.com
Email: [email protected]
Email: [email protected]
Add: Gangjia Zhihui Industrial Area, Xin Gangwan Rd. Liuhe, Nanjing, China 211500
HICLOVER Solution for Fighting COVID-19, with ISO9001/CE Certification. Auto. Control Waste Incinerator & Auto. Roll Air Filter(Air Purification)
– Высокотемпературная окраска
– До 150 кг / час.
– Расход энергии и топлива.
– запах удаления золы
– Автоматическая камера с регулируемой температурой процесса отверждения.
– Вторичная камера
– другие.
Nanjing Clover Medical Technology Co.,Ltd.
Tel: +86-13813931455(WhatsApp)
Website: www.hiclover.com
Email: [email protected]
Email: [email protected]
Add: Gangjia Zhihui Industrial Area, Xin Gangwan Rd. Liuhe, Nanjing, China 211500
HICLOVER Solution for Fighting COVID-19, with ISO9001/CE Certification. Auto. Control Waste Incinerator & Auto. Roll Air Filter(Air Purification)
