Archive: August 4, 2021

Food hygiene has always been a problem that everyone has been paying attention to. This has also made major businesses and stores pay great attention to their own food hygiene; for fear that problems will attract consumer complaints. Therefore, major businesses have introduced central kitchen air shower equipment to protect sanitation issues and hope to gain the trust of consumers.

People who enter the kitchen must uniformly change clothes, shoes, and hats, and uniformly blow and shower. This can greatly guarantee food hygiene and safety, making businesses happy and consumers eating at ease. However, when you use the air shower room , you must also maintain it accordingly. If you do not pay attention to the maintenance and cause the cleaning effect to be poor, it is useless. Next, I will introduce the nine main points of the air shower room maintenance:

1. Use instruments to measure the technical indicators of the equipment on a regular basis, and deal with them in time if they do not meet the requirements of technical parameters.

2. According to actual usage, regularly remove the filter material from the primary air filter for cleaning.

3. When the wind speed is found to be small, first check whether the surface of the primary air filter is black. If it is black, it means that the pre-filter contains more dust and the resistance increases, that is, the non-woven in the primary air filter should be removed The cloth is cleaned or replaced.

4. After replacing or cleaning the non-woven fabric, the wind speed still cannot be increased, indicating that the high-efficiency air filter has been blocked, causing increased resistance, and the high-efficiency air filter should be replaced.

5. When replacing the high-efficiency filter, you must remove the spray ball plate, take out the high-efficiency filter, and replace the new high-efficiency air filter according to the specifications and models of the original high-efficiency filter. When installing, confirm the arrow mark on the high-efficiency filter, and the arrow should point to the direction of the airflow. And to ensure a good seal to prevent leakage.

6. After the high-efficiency filter is replaced, it is necessary to confirm that there is no leakage in the frame, and use a dust particle counter to detect it, and it can work normally after reaching the technical indicators.

7. Regularly check and repair the electrical circuit. If there is any fault, refer to the electrical schematic diagram for repair.

8. Enclose the door regularly to align the electronic lock with its lock hole to prevent the lock pin from jamming.

9. The use temperature should not exceed 50℃, and the use of open flames is strictly prohibited.

Through the above introduction, everyone should have a certain understanding of the maintenance of the air shower. If you have further questions, you can visit our website for consultation .