May, 2021 - HICLOVER Incinerator

waste

Texas Ebola waste will not be disposed in Louisiana

May 24, 2021 by hiclover 0 Comments #incinerator, #waste, #waste-incinerator

On Friday Attorney General Buddy Caldwell announced the State of Louisiana reached an agreement with Texas incinerator Veolia Environmental Services and Louisiana hazardous waste landfill Chemical Waste Management to ensure that incinerator ash associated with the recent Dallas Ebola virus occurrence will not be transported or disposed of in Louisiana, .

On Oct. 13 the Louisiana Attorney General’s office obtained a restraining order in the 19th Judicial District Court to temporarily stop the transport of incinerated Ebola ash into Louisiana.
The temporary retraining order was extended on Oct. 21 at the request of all parties, before ultimately arriving at today’s agreement.

Attorney General Caldwell said, “I am pleased today’s agreement ends this chapter in the controversy of the transportation and disposal of Ebola waste.”

waste

Incinerator with Capacity of destruction in weight: 60 Kg/h.

May 24, 2021 by hiclover 0 Comments #incinerator, #waste, #waste-incinerator

Capacity of destruction in weight: 60 Kg/h.

It should be able to operate not less than 10 hours/day

This incinerator must be able to destruct all combustible wastes produced by hospitals, private clinics, laboratories, institutes, etc…

Design Specification : Types A, B, C, D, and E of medical waste

“PYROLYTIC” combustion, by controlling the gasification of waste.

The incinerator must avoid the release of black smoke and fine dust, (Smokeless) during the loadings.

It should be able to reduce the volume of wastes by 98%.

It should be able to hold emission in the second burn with gas residence of not less than 2 seconds.

The incineration should be completely free from visible smoke as well as offensive odours.

The lower calorific power (L.C.P) of this waste will be 3,500 kcal/kg

The Temperatures of combustion: Minimum will be 850^oC and max 1400^oC

Post combustion: >1100^oC.

The Internal diameter of the Chimney: Ø 400 and its height: 8 m

The Volume of the combustion chamber: 1.200 L

The Dimension of the door for loading in cm: 70×70.

Burner operation should be Automatic On/Off

Fuel : diesel

The supplier must provide necessary information for the best of the installation

This incinerator with “PYROLYTIC” combustion must have:

A combustion chamber of waste:

* Perfectly tight door for the manual loading of waste. The loading should be Manual, Batch Load

* A burner of lighting which the use is limited to the ignition of waste.

* Frontage of loading with door seals gone up on hinges, wheel of screw plug, flexible joint, and stuffing insulating out of refractory.

* The insulation of the combustion chamber should be composed of refractory bricks, having a high content of aluminium and insulates bricks in order to assure a minimum temperature on the outside sheet metal.

* Composition of the refractory;

Refractory concrete :

. Thickness : ≥100 mm

. Nature: 42% of Al203

Insulate in fibrous panels :

. Thickness: ≥75 mm

Nature: Calcium silicate.

* Burner of lighting of waste, with fuel, standard mono-bloc casting guiding plunging flame, lighting and safety of electronic ignition, permanent ventilation, electromagnetic sluice gate of regulation and isolating valve.

* Plate of combustion in Carborundum, avoiding the fixing of glass and slags.

waste

Bid to burn waste from out of town in Newhaven Incinerator

May 24, 2021 by hiclover 0 Comments #incinerator, #waste, #waste-incinerator

Veolia is seeking to source non-recyclable commercial and industrial waste for its Newhaven Incinerator from areas neighbouring East Sussex and Brighton and Hove.

It argues this will allow the incinerator to produce enough energy to power 25,000 homes continuously.

But cllr Rod Main from Newhaven said this would lead to more trucks and pollution.

Veolia applied for planning permission to East Sussex County Council to lift a planning condition to enable the scheme to go ahead.

General manager for Veolia in South Downs Allan Key said the company wanted to extend the catchment area outside East Sussex and Brighton and Hove.

He said it would not lead to physical changes at the incinerator or increase to the 242,000tpa capacity.

Mr Key said: “Energy demands are going to increase year on year. Facilities such as the one we have here in Newhaven recovers energy from waste that would otherwise be lost by going to out of county landfill.”

Cllr Main said: “They need more waste to help ESCC’s carbon footprint by pumping more carbon dioxide into the atmosphere (and it’s around 100,000 tonnes pa now) not to mention how many more trucks will be coming right across Sussex from who knows where adding to the pollution.

“It’s helping to power 25,000 homes. There’s a proposed wind farm just off the coast which might power 20 times that and it won’t be pumping 100,000 tonnes of CO2 into the atmosphere every year for the next 20 or more years.”

by: http://www.sussexexpress.co.uk/news/county-news/bid-to-burn-waste-from-out-of-town-in-newhaven-incinerator-1-6388465

waste

Waste Incinerator, Pet Cremator

May 24, 2021 by hiclover 0 Comments #incinerator, #waste, #waste-incinerator

Incinerator means same with cremator if you said incineration, but there is some difference.

a.) incinerator for waste. VS cremator for animals

b.) incineration to be ash and clean it. VS cremation and collect ash into pet cremation urns.

c.) waste stack disorderly.VS pet in chamber individual.

d.) waste material complicated. VS pet is body.

e.) waste incineration is public affairs. VS pet cremation is personal business more.

f.) waste incinerator with small-large scale capacity. VS pet cremation with regual pet size or weight

g.) waste incinerator feeding door small or big. VS pet cremator feeding door match with pet size

h.) waste material with or without fat. VS pet body with fat.

i.) waste incinerator with or without exchange feeding door. VS pet cremator better with exchange feeding door.

waste

Medical Incinerator

May 24, 2021 by hiclover 0 Comments #waste-incinerator

Basic Info.

Usage:Industrial

Place Style:Incinerator

Manufacturing Level:Incinerator

Media:Incinerator

Fuel:Oil-fired

Burning Style:Incinerator

Pressure:Incinerator

Water Circulation:Incinerator

Gas Flow Type:Incinerator

Export Markets:Global

Additional Info.

Trademark:CLOVER

Product Description

We are one of the largest waste incinerator manufacturer and exporter of China. Pyrolytic incinerator specialized is main waste treatment system all over the world, for Medical Waste, Animal Incineration, Pet cremation and other Solid waste. Presently, we provide small and large scale incinerators pet cremation equipment prices china, pet cremation equipments china, pet cremation equiptment, pet cremation in riyadh, pet cremation incinerator cost, as local customer requirements and design upgraded incinerator with our leading technology.

Key Features: * All models with Dual combustion chamber. * Stainless Steel chimney/stack, long lifetime. *according to sequence * High temperature, long lifetime of incinerator. * Free or minimal installation on site. * High burn rate, from 10kgs to 500kgs per hour, up to 6ton per day. *based on order * New Design for pet animal cremation business. * One year warranty on incinerator and components in stock.

Items/Model	YD-10C	YD-20C	YD-30C	YD-50C
Burning Rate (kgs/Hour)	10 kgs/Hr.	20 kgs/Hr.	30 kgs/Hr.	50 kgs/Hr.
Feed Capacity (kgs)	40 kgs	40 kgs	50 kgs	80 kgs
Equipment Weight	1200 kgs	1200 kgs	1800 kgs	2200 kgs
Primary Chamber (Liters)	200	200	250	400
Secondary Chamber (Liters)	140	140	140	140
External Dimensions (cm)	170x140x160	170x140x160	170x140x190	180x160x200
Internal Dimensions (cm)	55x55x65	55x55x65	55x55x85	70x70x85
Oil Tank(Liters)	50	100	100	150
Door Opening (cm)	38 x 48	38 x 48	38 x 48	45×55
Chimney (M)	5	5	5	5
Chimney Type	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel
Secondary Chamber	YES	YES	YES	YES
Mix-Combustion Chamber	YES	YES	YES	YES
Smoke Filter Chamber	YES	YES	YES	YES
Combustion Fuel	Oil/Gas	Oil/Gas	Oil/Gas	Oil/Gas
Residency Time	2.0 Sec.	2.0 Sec.	2.0 Sec.	2.0 Sec.
Temperature Monitoring	YES	YES	YES	YES

waste

"Burner Cotrol Box"

May 24, 2021 by hiclover 0 Comments #italiano

Scatola di Cotrol del bruciatore del combustibile dell’inceneritore

waste

Bangor’s former incinerator property is not for sale, authority officials say

May 24, 2021 by hiclover 0 Comments #incinerator, #waste-incinerator

The Bangor Borough Authority will not sell the former incinerator property. Not right now, at least.

The board voted Thursday evening to support authority Chairman Donald Butz’s Oct. 2 letter to borough council President James Kresge that stated the authority need to not sell the incinerator and the surrounding home now identified collectively as the Bangor Company Park.

“Too lots of individuals had challenges with the sale,” Butz mentioned.

Negotiations were underway in the summer season that would have had the authority sell the lengthy-dormant 79-acre lot for $1.075 million to Valley Industrial Properties.

Officials discussed plans with V.I.P. who wanted to fill the deep valleys and level the steep slopes of the Ridge Road house to make it suitable for development, stated authority Administrator Marino Saveri in June.

Even so, some residents and borough officials expressed concern that dirt and landfill possibly hauled in from out of state by V.I.P. could have a potentially adverse environmental effect.

Butz decided to create a letter to the borough asking for a meeting concerning the property shortly after the authority’s September meeting when far more than a dozen residents spoke out against the sale to V.I.P.

“I will be recommending at the next authority meeting that the authority cease all activities in regard to the sale of the properties of the Bangor Company Park, and to meet with representatives of the borough council in regard to the properties,” Butz’s letter study in part.

David Houser who serves on each the borough council and the authority was the only vote on the board not in support of Butz’s letter. Houser has expressed sympathy in the previous with these who have been against the sale to V.I.P. and he did not really feel the letter had enough teeth to be meaningful.

“The letter is open-ended,” Houser said. “It doesn’t specify any dates.”

As long as the authority is in possession of the incinerator home, a sale to a landfill hauler is still achievable, mentioned Anna Maria Caldara, a Bangor resident who has been a vocal opponent of the property’s sale.

“We need to have assurances from the authority that their perspective has changed,” Caldara stated right after the meeting, “and from this point forward we need to have to know they take sustainability seriously.”

Authority and borough officials met to discuss the Bangor Company Park on Oct. 23. Any eventual plans or discussions of sale will be done in coordination with the borough council, according to Saveri.

“If we do something in the future, we will do it in conjunction with the borough,” Saveri mentioned.

The authority also voted without objection to reimburse $14,000 to Nimaris Building, which had spent dollars on various engineering permits at the incinerator website in recent years. Authority officials told Nimaris that they would get their income back if a sale did not go by means of, according to Saveri.

The house will stay dormant and closed for now. Hunters and neighbors of the property frequently make their way past the fences and really should be aware that police will be patrolling the home and trespassers will be prosecuted, Saveri said.

Our editors found this article on this site using Google and regenerated it for our readers.

waste

hot medical waste disposing machine, Operation Condition: 8-16 hr/ day

May 24, 2021 by hiclover 0 Comments #incinerator, #incinerators, #waste, #waste-incinerator

hot medical waste disposing machine, Operation Condition: 8-16 hr/ day
Control: Built-in data recording
Operating temperature: Incinerator
/Primary Combustion Chamber
Primary Chamber: 900 – 1200 0C

Type: continuous loading, Top Loading
Capacity/Burn rate per hour: 250 -300 kg/hr
Material:
External- 3 layers
Internal lining:  a fire proof material of pre-fired refractory bricks with Aluminium lining, resistant to corrosive waste or gas and to thermal shock
Secondary
Combustion
Chamber:
Type: horizontal/vertical
Temperature:  1200- 1300 oC
Residence time of gases : >2 seconds
Ash Residue: <5% of original waste size
Ash Handling System: Both Automatic and manual removal of Ash. Must ensure removal/treatment of hazardous remnants of ash
Flue gas treatment   system : Capable of treating the flow of flue  gas as the incinerator is operating at its maximum capacity
Auxiliary device: Water level gauge, pressure sensor, PH sensor..etc
Auxiliary device: Fuel cut-off device
Waste  feeding mechanism: Automatic pneumatic/hydraulic waste loading system or conveyor belt , capacity 650-800 L at a time
Chimney (Stack):
Type: Vertical type
height:>7 meter’
Material: Fireproof cast, stainless steel
OUTPUT:
GAS- SMOKELESS,ODORLESS
ASH -Max <5% of original waste size
Reduction of Pollutant gas SO2, HCL, HF and line particulate
Emission standard:
WHO/ European
Test report for emission testing provided?
Heat exchange mode: Automatic

Accessories:
All standard accessories for incinerator, including but not limited to loading system, heat exchangers, pollution control system, ash removal system, including ladder and oil tanker (2500litre capacity).
Operating Environment:
The incinerator is capable to operate at the altitude of 2400mt above sea level. (according to the site conditions)
Power Requirement:
220 Vac single phase or 380 Vac three phase 4 wire system  50HZ
Installation Testing and Commissioning :   to be conducted by certified or qualified personnel.
Supplier shall provide the following documentation
User (Operating) manual in English.
Service (Technical / Maintenance) manual in English.
Certificate of calibration and inspection from factory.
Fast moving spare parts: Supplier is able to provide fast moving spare parts with quantities as described in the price schedule or their equivalent.
Training: Supplier is able to provide training on operation, management and maintenance of incinerators.
Warranty
Comprehensive warranty for minimum 2 year.
Maintenance Service during Warranty Period
During warranty period supplier must ensure, corrective/breakdown maintenance whenever required.
Supplier has a local agent or branch office in Ethiopia (please indicate the name and contact details of the agent)
Supplier provides labor, lifting equipment and tools needed for the installation, testing and commissioning of the incinerator. The supplier will be responsible for the safety of its staff, workers and laborers during the installation, testing & commisssioning
Able to provides all necessary information that would be used as an input for preparation of floor (platform) and room for the incinerator to be supplied such as the following;
Lay outs (drawings) and  pictures of the incinerators to be installed
 Length, width and height of incinerator,
 Area (length x width) for the floor (platform) and Length, width and height for roofing, for each type of incinerators to be installed
Needs during the transport, installation, assembly, commissioning and operation of the equipment in terms of access points, available space to operate (inside and outside of the room), ways to get to the site where the equipment will be placed or any others. ;
Technical Specifications (fuel consumption rat
e, weight, anchoring system, support points, etc.);
 Chimney specifications to be used for the roof design ( size, support needs, insulation);
Considerations related to operation and Maintenance, for e.g., minimum available area to perform routine maintenance tasks and replacement of key parts that need to be changed more frequently;
Any consideration/need of the incinerator while being operated that might impact the design of the room/shelter where it will be placed.
Other important information to be considered that can influence or impact the designing and building processes of the infrastructure for the incinerators, for example area dimension for other accessary parts like fuel tanker storage, if applicable, etc….
Delivery time (DAP, Addis Ababa) in weeks
Name of manufacturer including website of the manufacturer &/ supplier & country of origin

waste

Adjumani Hospital incinerator blows up

May 24, 2021 by hiclover 0 Comments #incinerator, #waste, #waste-incinerator

ADJUMANI.
The incinerator at Adjumani Hospital, which was built four years ago, has burst due to overheating.

For the past four months, support staff at the hospital have been dumping medical waste within the enclosure of the incinerator instead of burning it.

The hospital administrator, Mr Michael Ojja, told Daily Monitor on Wednesday that the incinerator broke down due to continuous burning of accumulated waste from the hospital.

“The waste has increased due to the overwhelming number of admissions and people visiting the outpatient department. But we need to find solutions to protect the staff and environment,” Ojja said.

The hospital medical superintendent, Dr Dominic Drametu, said they had asked the government for construction of a new incinerator.

He said the incinerator was too small to dispose of the hospital’s voluminous medical waste.

Patients admitted to the general ward next to the incinerator expressed fear of infections arising from poor disposal of hazardous medical waste.

According to the 2013-2014 annual health sector performance report, Adjumani Hospital registers 11,731 in-patients, 83,953 outpatients and 1,695 deliveries.

Scientific facts
Incineration of heavy metals or materials with high metal content (in particular lead, mercury and cadmium) releases toxic metals to the environment and the burnt medical waste contains micro-organisms that are potentially harmful to human beings, according to WHO.

waste

Incinerator

May 24, 2021 by hiclover 0 Comments #waste-incinerator